Free Click & Collect
Within One Hour
Delivery address
Collection branch
Ideas & Advice
VAT
EX
INC
Simpson Strong-tie THM230/47 Mono Truss Hanger 47mm
Hover Over to Zoom In
Frequently bought together
Overview
- Features speed prongs for easier nailing and faster installation
- Offers two installation options, square twist nails only or square twist nails and double shear nailing
- Double shear nailing feature allows 75mm nails to be installed at a 45° angle. This provides easier nail driving as the installer doesn't need to swing the hammer sideways
- Square twist nails only.
- Square twist nails and double shear nailing
- Features speed Prongs for ease of installation
Technical specification
Height
91.5 mm
Thickness
75 mm
Width
47 mm
Material
Pre-Galvanised Steel
Colour
Galvanised
Finish
Galvanised
Pack Quantity
1
Type
Joist Hanger
Range Description
Builder Metalwork
Brand Name
Simpson Strong-tie
Manufacturer Model No
THM230/47
Data sheets
Reviews
Be the first to review this product.
Simpson JHA270/75 Timber to Timber Joist Hanger
JHAs are height-adjustable joist hangers used to support timber joists from timber members. This can be fitted quickly and accurately due to the adjustable height strap, location tab, and speed prongs.
This product is the standard leg (JHA270) version and can be installed directly on the bearing joist or wrapped over the top to achieve higher performance.
£1.68 each (Inc. VAT)
Simpson Strong-Tie Masonry Supported Joist Hanger 150 mm x 47 mm JHM150/47
The JHM range of joist hangers can be used to connect solid sawn joists, trusses and engineered joists to masonry walls or steel beams.
£1.63 each (Inc. VAT)
Simpson Strong-Tie Girder Truss Clip 47 mm wide TCP47
The TCP47 truss clip attaches girders, trusses and rafters to wall plates to provide wind restraint.
£0.60 each (Inc. VAT)
Simpson Strong-Tie HES10B10 1000mm Heavy Engineered Bent at 100mm
A direct replacement for traditional restraint straps, the innovative design of these lightweight straps allows ease of handling and installation whilst maintaining the structural strength and robustness of much heavier weight types.
The HES (heavy engineered strap) replace the traditional heavy (30 x 5mm) restraint straps in roof and floor construction.
Reduced thickness allows the HES strap to span the bottom chords of trusses and over floor joists without the need for notching.
HES straps are less than 40% of the weight, quicker to fit, and overcome many fixing problems associated with traditional heavy straps.
£7.87 each (Inc. VAT)