Please be aware that we will be performing scheduled maintenance on our website from 12:00pm BST on Saturday, May 3rd until 9:00am BST on Monday, May 5th. During this time, our website will be temporarily unavailable. We apologise for any inconvenience this may cause.
This Makita 6843 auto feed 240v screwgun has improved casing and an anti tilt device to prevent screw sway. This screwdriver has a screw capacity of 25-55mm and 4mm x 5mm maximum dry wall screw capacity. It has a 470 watt input wattage and 6,000 rpm load
The Makita 2012NB Thicknesser has a maximum planing depth of 3mm and a planing width of 304mm. The head is held on 4 posts for rigidity leading to a fine and accurate workpiece. The planing depth is easy to set and blades easy to change.
The Makita 2704NX is a robust 260mm blade diameter Table Saw with the ability to easily rip 8ft x 4ft sheet. It features a telescopic guide rail, elecronic soft start, electric brake and a powerful 1,650W motor. The 2704NX is supplied with a TCT blade and stand.
combination hammer based on predecessor model HR2610 but with improved operation mode change lever With this drill you will not need to rotate the chuck in order to switch between Rotation and Hammering modes. Hand pain and fatigue is minimised thanks to the rubberised soft-grip handle which complements the overall lightweight ergonomic design.
This Makita 6843 auto feed 240v screwgun has improved casing and an anti tilt device to prevent screw sway. This screwdriver has a screw capacity of 25-55mm and 4mm x 5mm maximum dry wall screw capacity. It has a 470 watt input wattage and 6,000 rpm load
The Makita 2012NB Thicknesser has a maximum planing depth of 3mm and a planing width of 304mm. The head is held on 4 posts for rigidity leading to a fine and accurate workpiece. The planing depth is easy to set and blades easy to change.
The Makita 2704NX is a robust 260mm blade diameter Table Saw with the ability to easily rip 8ft x 4ft sheet. It features a telescopic guide rail, elecronic soft start, electric brake and a powerful 1,650W motor. The 2704NX is supplied with a TCT blade and stand.
combination hammer based on predecessor model HR2610 but with improved operation mode change lever With this drill you will not need to rotate the chuck in order to switch between Rotation and Hammering modes. Hand pain and fatigue is minimised thanks to the rubberised soft-grip handle which complements the overall lightweight ergonomic design.