Rawlplug Frame Screw 7.5mm x 132mm Torx Head - Bag of 20
359432
Hover Over to Zoom In
Overview
Countersunk Head
Made of hardened steel, electro-zinc coated
Imposes less stress on substrate during installation due to no expansion force
Small hole diameter giving high loads
Easily removed for temporary works
Suitable for use in pre-drilled 6mm diameter concrete, full and hollow bricks, stone and structural clay tile and without pre-drilling in aerated concrete and timber
Applications include use with door and window frames, suspended ceilings and lightweight steel angles
EcoTherm Eco-Deck comprises a fibre free rigid polyisocyanurate (PIR) insulation core, faced with an aluminium foil composite on both sides, bonded to 6mm exterior grade plywood on one side.
The Gyproc drywall adhesive is a high-quality general purpose adhesive providing increased strength and safety in wall and ceiling applications without leaving weak points. An ideal choice for fixing plasterboard and levelling uneven walls.
A gypsum based board ideal for internal use for walls and ceilings. Easy to cut, shape and fix, it can be plastered ordirectly decorated, Not suitable for moist or wet conditions. This product comes in a square edge finish. When fixing this plasterboard sheet use drywall screws.
An economical friction-fit system to assemble frames for strong, compact, lightweight non load-bearing partitions. The metal stud partitioning is ideal for use in domestic and commercial situations, for heights up to 12m and a wide range of partition thicknesses.
EcoTherm Eco-Deck comprises a fibre free rigid polyisocyanurate (PIR) insulation core, faced with an aluminium foil composite on both sides, bonded to 6mm exterior grade plywood on one side.
The Gyproc drywall adhesive is a high-quality general purpose adhesive providing increased strength and safety in wall and ceiling applications without leaving weak points. An ideal choice for fixing plasterboard and levelling uneven walls.
A gypsum based board ideal for internal use for walls and ceilings. Easy to cut, shape and fix, it can be plastered ordirectly decorated, Not suitable for moist or wet conditions. This product comes in a square edge finish. When fixing this plasterboard sheet use drywall screws.
An economical friction-fit system to assemble frames for strong, compact, lightweight non load-bearing partitions. The metal stud partitioning is ideal for use in domestic and commercial situations, for heights up to 12m and a wide range of partition thicknesses.