BASED Approved single core conduit. Intended for use in semi-flush exposed conduits and embedded conduits, as well as in closed installation ducts. Can be easily drawn into conduit or trunking. Green/Yellow suitable for use as Earth bonding.
Low smoke zero halogen domestic wiring cable for the surface wiring of sockets and lighting where fire, smoke emission and toxic fumes create a potential threat to life and equipment. Can be installed in fixed installations in dry or damp premises clipped to surface, on trays or in free air where mechanical damage would not be an issue. Suitable for laying in conduit or trunking where mechanical protection is required.
3 core heat resistant flexible cable, designed for internal wiring or supply cords to electrical apparatus. Suitable for installation in high temperature environments up to +90°C where there is low risk of mechanical stresses. Not suitable for outdoor use, or laying in trays or racks.
Safe-D Fire Rated Cable Clips are fully certified to satisfy legislative requirements to secure all surface cables in escape routes in residential and non-residential buildings (Amendment 3 to the 17th Edition, BS7671:2015, Wiring Regulations). When used with appropriate fixings Safe-D Clips can securely hold bundles of cables on a surface at 970ºC for at least 2 hours. Manufactured in the UK using specific high-temperature pliable steel produced to BS EN standards with full traceability. Safe-D Clips have a passivated finish to protect against corrosive elements and minimise the risk of rust failure. Safe-D Clips feature 20mm tab widths; while the specific pliable-gauge and smooth/rounded corners (as required by design-code BS7671 s 522.8.11) protect both cables and installers; unique features which make Safe-D Clips the quickest and easiest to install. Safe-D50 Clips are suitable for use with standard trunking Size 6 (50x25mm), Size 7 (50x32mm), or Size 8 (50x50mm).
BASED Approved single core conduit. Intended for use in semi-flush exposed conduits and embedded conduits, as well as in closed installation ducts. Can be easily drawn into conduit or trunking. Green/Yellow suitable for use as Earth bonding.
Low smoke zero halogen domestic wiring cable for the surface wiring of sockets and lighting where fire, smoke emission and toxic fumes create a potential threat to life and equipment. Can be installed in fixed installations in dry or damp premises clipped to surface, on trays or in free air where mechanical damage would not be an issue. Suitable for laying in conduit or trunking where mechanical protection is required.
3 core heat resistant flexible cable, designed for internal wiring or supply cords to electrical apparatus. Suitable for installation in high temperature environments up to +90°C where there is low risk of mechanical stresses. Not suitable for outdoor use, or laying in trays or racks.
Safe-D Fire Rated Cable Clips are fully certified to satisfy legislative requirements to secure all surface cables in escape routes in residential and non-residential buildings (Amendment 3 to the 17th Edition, BS7671:2015, Wiring Regulations). When used with appropriate fixings Safe-D Clips can securely hold bundles of cables on a surface at 970ºC for at least 2 hours. Manufactured in the UK using specific high-temperature pliable steel produced to BS EN standards with full traceability. Safe-D Clips have a passivated finish to protect against corrosive elements and minimise the risk of rust failure. Safe-D Clips feature 20mm tab widths; while the specific pliable-gauge and smooth/rounded corners (as required by design-code BS7671 s 522.8.11) protect both cables and installers; unique features which make Safe-D Clips the quickest and easiest to install. Safe-D50 Clips are suitable for use with standard trunking Size 6 (50x25mm), Size 7 (50x32mm), or Size 8 (50x50mm).