Browse our range of jointing compounds, priming slurry and water seal, for a neat finish to any patio or paving project. Jointing compound fills the gaps in between paving slabs, just like grout, and is suitable for use on patios, pavements and paths. Priming slurry is perfect for laying many types of paving, including porcelain tiles, providing an exceptional bond between the slab and fresh mortar bed. Our trade quality paving grout is quick and easy to use and is available in a range of sizes and colours. Don’t forget water seal to protect many types of masonry and concrete, and sealant for protecting driveways.
Sovereign WeatherChek Façade Cream is an easy-to-use water repellent for protecting external masonry from penetrating damp and freeze-thaw damage. The viscous emulsion of silane and siloxanes penetrates and impregnates porous masonry to produce a water-repellent surface. WeatherChek Façade Cream can be applied with a spray, brush or roller to porous masonry such as brick, mortar, render, limestone and sandstone. Reducing the porosity of masonry also results in reduced heat transfer, improving the thermal properties of a dwelling. WeatherChek Façade Cream also does not prevent a wall from breathing.
The RLT PACK is a compact treatment system intended for the remediation of moderate to severe mould outbreaks affecting three to four rooms within a residential property. Suitable for use by both homeowners and professional contractors, it effectively addresses extensive mould contamination in houses or apartments.
Size
Pack
Suitable for
Amateur and Professional 4 part treatment for the long term eradication of mould contamination to interior walls, ceilings and Soft Furnishings
Coverage
45-50 Square metres
Interior or Exterior Use
Interior
Container Type
Plastic Bottle and Cardboard Box
Application Method
Cloth, Brush and roller
Type
Concentrates and ready to use
Pack Quantity
7 Mould Treatment Products plus gloves and cloth
Certifications Met
GB Amendment Certificate RLT Bactdet 05 HSE No 8144/RLT Halophen HSE No 4081/Clearmould Spray Approved under COPR 1986 )as amended) by the H&S Executive HSE No 4824/Fungicidal Additive Approved under COPR 1986 (as amended) by the H&S Executive HSE No 6605
A radical chemical blend containing a sophisticated mixture of alkaline materials and wetting agents to attack varied types of blockages whether caused by hair, grease, fat, oils, etc.. Heavier than water the unique formula holds the active chemicals together, allowing them to sink to the source of the problem with minimum loss of activity.
Mould growth on silicone sealant has 2 major causes: poor quality sealant or standing water atop a poorly applied joint. Start again and do the job right! The Dryzone Silicone Sealant Replacement Kit contains everything needed to give humid bathrooms and kitchens a fresh new look with premium sanitary-grade silicone joints. 12-item kit with absolutely everything needed to successfully carry out sealant removal and replacement Profile all joint sizes and corner angles with versatile multi-head profiling tool Disinfect area with included alcohol wipes Remove and apply simply and cleanly with included brush, applicator gun and masking tape Silicone Sealant tested to EN 15651-3 for use in sanitary areas.
Sovereign WeatherChek Façade Cream is an easy-to-use water repellent for protecting external masonry from penetrating damp and freeze-thaw damage. The viscous emulsion of silane and siloxanes penetrates and impregnates porous masonry to produce a water-repellent surface. WeatherChek Façade Cream can be applied with a spray, brush or roller to porous masonry such as brick, mortar, render, limestone and sandstone. Reducing the porosity of masonry also results in reduced heat transfer, improving the thermal properties of a dwelling. WeatherChek Façade Cream also does not prevent a wall from breathing.
The RLT PACK is a compact treatment system intended for the remediation of moderate to severe mould outbreaks affecting three to four rooms within a residential property. Suitable for use by both homeowners and professional contractors, it effectively addresses extensive mould contamination in houses or apartments.
A radical chemical blend containing a sophisticated mixture of alkaline materials and wetting agents to attack varied types of blockages whether caused by hair, grease, fat, oils, etc.. Heavier than water the unique formula holds the active chemicals together, allowing them to sink to the source of the problem with minimum loss of activity.
Mould growth on silicone sealant has 2 major causes: poor quality sealant or standing water atop a poorly applied joint. Start again and do the job right! The Dryzone Silicone Sealant Replacement Kit contains everything needed to give humid bathrooms and kitchens a fresh new look with premium sanitary-grade silicone joints. 12-item kit with absolutely everything needed to successfully carry out sealant removal and replacement Profile all joint sizes and corner angles with versatile multi-head profiling tool Disinfect area with included alcohol wipes Remove and apply simply and cleanly with included brush, applicator gun and masking tape Silicone Sealant tested to EN 15651-3 for use in sanitary areas.