Free Click & Collect
Within One Hour
Delivery address
Collection branch
Ideas & Advice
VAT
EX
INC
Safeguard Drybase ECS Epoxy Floor Coating Grey 5L
Hover Over to Zoom In
Overview
- Water-based technology provides easy-to-clean finish
- Resistant to oils, greases, solvents & other chemicals
- Provides hardwearing and durable floor coating
- Two coats required - one pack provides one coat
Technical specification
Size
5kg
Interior or Exterior Use
Interior
Coverage per Litre
Up to 30 - 35 m2 per 5 kg pack for one coat. Two coat application is standard.
Drying Time
36 - 72 hours
Time to Full Cure
5 - 7 days
VOC Level
Low 0.3-7.1%
Colour
Grey
Type
Floor Epoxy
Manufacturer Model No
FG-A00371-001
Brand Name
Drybase
Data sheets
Reviews
Be the first to review this product.
NEW
Drybase Tanking Slurry is a cementitious, ready-mixed surface waterproofer. The waterproofing function is achieved by a unique composition of cement, graded quartz sand and selected additives. It can be used against active and passive water pressures. The initial and final bonding capability of Drybase Tanking Slurry is excellent, making it suitable to be applied to horizontal as well as vertical surfaces. It is durable, resistant to frost and heat after setting, but also permeable to vapour. Drybase Tanking Slurry is tested for use in contact with drinking water.
£59.06 each (Inc. VAT)
NEW
Kit contains: x1 Dryrod 50 Box x1 Dryzone System Hole Clearing Tool - x1 Dryzone System Rod Cutting Tool- x1 Dryzone Drill Bit - 12mm x 300mm - x1 Stormdry Xr Mortar - No fuss, no mess, no stress. Dryrod is the next generation of rising damp treatment developed by Safeguard Europe Ltd. The patented, BBA approved 12mm diameter DIY damp proofing rods carry a powerful water repellent material, which cures to form a powerful barrier to rising damp. Once they are inserted, the rods will start to dry out the wall by slowly diffusing water repellent deep into the damp masonry, curing to form a powerful barrier to further rising damp. Installation: Simply insert the 9" rods into a series of 12mm holes drilled into the lowest available continuous mortar course of the wall. No specialist pumps or mastic guns required. A normal hammer drill will suffice. Once installed they diffuse the active ingredient deep into the wall before it cures to form a water-repellent chemical damp course. Advantages over other methods: The most effective rising damp treatment available - Proven to work even up to 95% saturation Quick & easy to install DIY rising damp treatment - Simply drill holes & insert the damp-proofing rods to form a new chemical damp course. No mess to clean up - The active ingredient is contained within the rods so there's no chance of messy spillages that occur with other solutions for damp proofing for walls.
£148.32 each (Inc. VAT)
Acrypol + Waterproof Roof Coating 5kg Black
Acrypol + is a total roof coating waterproof system developed to refurbish failed industrial, commercial or domestic flat roofs. Brush applied as a semi liquid paste, it dries to form an ultra tough, seamless flexible overlay
£90.59 each (Inc. VAT)
NEW
Drybase Tanking Slurry is a cementitious, ready-mixed surface waterproofer. The waterproofing function is achieved by a unique composition of cement, graded quartz sand and selected additives. It can be used against active and passive water pressures. The initial and final bonding capability of Drybase Tanking Slurry is excellent, making it suitable to be applied to horizontal as well as vertical surfaces. It is durable, resistant to frost and heat after setting, but also permeable to vapour. Drybase Tanking Slurry is tested for use in contact with drinking water.
£30.73 each (Inc. VAT)