Cures fast enough to allow moisture-sensitive floor coverings like solid wood, LVT, and rubber to be installed in just 4 days, drastically reducing project delays.
Provides a generous 2 to 3-hour open time, giving installers plenty of time to mix, pour, screed, and float large areas before the material begins to harden.
Designed to be mixed with locally sourced graded aggregates and water, significantly lowering transportation weight and material costs compared to buying fully pre-mixed bags.
Formulated to cure with minimal tension, preventing the screed from cracking, curling, or shrinking to ensure a perfectly flat, stable substrate for high-end floorings.
Delivers excellent thermal conductivity and high compressive strength, making it completely safe and highly efficient for encapsulating bonded or floating heated screed systems.
Kit contains: x1 Dryrod 50 Box x1 Dryzone System Hole Clearing Tool - x1 Dryzone System Rod Cutting Tool- x1 Dryzone Drill Bit - 12mm x 300mm - x1 Stormdry Xr Mortar - No fuss, no mess, no stress. Dryrod is the next generation of rising damp treatment developed by Safeguard Europe Ltd. The patented, BBA approved 12mm diameter DIY damp proofing rods carry a powerful water repellent material, which cures to form a powerful barrier to rising damp. Once they are inserted, the rods will start to dry out the wall by slowly diffusing water repellent deep into the damp masonry, curing to form a powerful barrier to further rising damp. Installation: Simply insert the 9" rods into a series of 12mm holes drilled into the lowest available continuous mortar course of the wall. No specialist pumps or mastic guns required. A normal hammer drill will suffice. Once installed they diffuse the active ingredient deep into the wall before it cures to form a water-repellent chemical damp course. Advantages over other methods: The most effective rising damp treatment available - Proven to work even up to 95% saturation Quick & easy to install DIY rising damp treatment - Simply drill holes & insert the damp-proofing rods to form a new chemical damp course. No mess to clean up - The active ingredient is contained within the rods so there's no chance of messy spillages that occur with other solutions for damp proofing for walls.
Pavetuf UPVC and Fascia Cleaner is a high performance, long lasting advanced formula which removes algae, moss, fungus, leaf staining and general soiling from white and coloured exterior UPVC. It is fast acting and easy to apply, reveing and brightening exterior UPVC. Containing no colvents, acids or caustic soda means it will not damage the treated surface.
Setcrete Acrylic Primer prevents unacceptably rapid drying of Setcrete Floor Levelling Compounds over absorbent subfloors and promotes adhesion to non-absorbent surfaces. It is suitable for use over normal underfloor heating installations and is coloured green to provide the user with visual control of coverage uniformity.
Setcrete Acrylic Primer should be used on absorbent surfaces such as concrete, sand/cement screeds, plywood and hardboard. It should also be used on non-absorbent surfaces of terrazzo, power floated concrete, quarry and ceramic tiles, sound asphalt, well bonded epoxy and polyurethane coatings and minimal existing adhesive residue.
Manufacturer Model No
T0600K2A
Brand Name
Setcrete
Colour
Green
Size
2.50 L
Drying Time
20-60 min
Suitable for
used on absorbent surfaces such as concrete, sand/cement screeds, plywood and hardboard
Achieve a perfectly smooth, level surface with Mapei Latexplan Trade (Part A & B). This high-performance, two-part smoothing compound is specifically engineered for internal subfloors, offering a reliable, protein-free solution that stands up to heavy foot traffic and demanding installations.
Whether you are preparing a subfloor for ceramic tiles, natural stone, resilient flooring, or wood, Latexplan Trade provides the flexibility and strength needed for a long-lasting finish
Kit contains: x1 Dryrod 50 Box x1 Dryzone System Hole Clearing Tool - x1 Dryzone System Rod Cutting Tool- x1 Dryzone Drill Bit - 12mm x 300mm - x1 Stormdry Xr Mortar - No fuss, no mess, no stress. Dryrod is the next generation of rising damp treatment developed by Safeguard Europe Ltd. The patented, BBA approved 12mm diameter DIY damp proofing rods carry a powerful water repellent material, which cures to form a powerful barrier to rising damp. Once they are inserted, the rods will start to dry out the wall by slowly diffusing water repellent deep into the damp masonry, curing to form a powerful barrier to further rising damp. Installation: Simply insert the 9" rods into a series of 12mm holes drilled into the lowest available continuous mortar course of the wall. No specialist pumps or mastic guns required. A normal hammer drill will suffice. Once installed they diffuse the active ingredient deep into the wall before it cures to form a water-repellent chemical damp course. Advantages over other methods: The most effective rising damp treatment available - Proven to work even up to 95% saturation Quick & easy to install DIY rising damp treatment - Simply drill holes & insert the damp-proofing rods to form a new chemical damp course. No mess to clean up - The active ingredient is contained within the rods so there's no chance of messy spillages that occur with other solutions for damp proofing for walls.
Pavetuf UPVC and Fascia Cleaner is a high performance, long lasting advanced formula which removes algae, moss, fungus, leaf staining and general soiling from white and coloured exterior UPVC. It is fast acting and easy to apply, reveing and brightening exterior UPVC. Containing no colvents, acids or caustic soda means it will not damage the treated surface.
Setcrete Acrylic Primer prevents unacceptably rapid drying of Setcrete Floor Levelling Compounds over absorbent subfloors and promotes adhesion to non-absorbent surfaces. It is suitable for use over normal underfloor heating installations and is coloured green to provide the user with visual control of coverage uniformity.
Setcrete Acrylic Primer should be used on absorbent surfaces such as concrete, sand/cement screeds, plywood and hardboard. It should also be used on non-absorbent surfaces of terrazzo, power floated concrete, quarry and ceramic tiles, sound asphalt, well bonded epoxy and polyurethane coatings and minimal existing adhesive residue.
Achieve a perfectly smooth, level surface with Mapei Latexplan Trade (Part A & B). This high-performance, two-part smoothing compound is specifically engineered for internal subfloors, offering a reliable, protein-free solution that stands up to heavy foot traffic and demanding installations.
Whether you are preparing a subfloor for ceramic tiles, natural stone, resilient flooring, or wood, Latexplan Trade provides the flexibility and strength needed for a long-lasting finish