Would use again in conjunction with other soundproofing
Used dabbed on to a dividing wall in a semi due to noise from next door. Has made very little difference to noise but would assume would be a lot better used on a student wall with insulation stuffed in. Little disappointed
Gyproc WallBoard DUPLEX, backed with a vapour controlled membrane, is a high-quality and durable product. This wallboard features an aerated Gypsum centre, secured by bonded paper liners and polyester film.
With an Ivory-faced paper and metallised polyester film reverse, it can be used for wall and ceiling linings where vapour control and plasterboard lining are required in one fixing operation.
Gyproc WallBoard DUPLEX is a plasterboard that is suitable for dry lining internal surfaces.
Performance board product with a specifically engineered weight of 10kg/m². Suitable for walls and ceilings that are engineered to meet the guidance given in the revised national Building Regulations Approved document E (transmission of sound). Robust details reference separating walls and floors.
Gyproc ThermaLine PIR consists of 12.5mm Gyproc WallBoard binded to CFC and HCFC-free, high performance polyisocyanurate foam with two integral vapour control layers. Designed to be used in both refurbishment and new build for walls, ceiling, room in the roof and window reveals where a high level of cost effective thermal insulation is required to reduce heat loss from buildings as part of our British Gypsum BBA approved systems.
Knauf Wallboard is a plasterboard with an ivory paper face, ideally suited to receive a plaster finish, or for direct decoration. Strong, versatile, and good value, Knauf Plasterboards have a conductivity figure of k = 0.16 W/mK. Knauf Wallboard complies fully with BS EN520 and is categorised as Type A.
Gyproc WallBoard DUPLEX, backed with a vapour controlled membrane, is a high-quality and durable product. This wallboard features an aerated Gypsum centre, secured by bonded paper liners and polyester film.
With an Ivory-faced paper and metallised polyester film reverse, it can be used for wall and ceiling linings where vapour control and plasterboard lining are required in one fixing operation.
Gyproc WallBoard DUPLEX is a plasterboard that is suitable for dry lining internal surfaces.
Performance board product with a specifically engineered weight of 10kg/m². Suitable for walls and ceilings that are engineered to meet the guidance given in the revised national Building Regulations Approved document E (transmission of sound). Robust details reference separating walls and floors.
Gyproc ThermaLine PIR consists of 12.5mm Gyproc WallBoard binded to CFC and HCFC-free, high performance polyisocyanurate foam with two integral vapour control layers. Designed to be used in both refurbishment and new build for walls, ceiling, room in the roof and window reveals where a high level of cost effective thermal insulation is required to reduce heat loss from buildings as part of our British Gypsum BBA approved systems.
Knauf Wallboard is a plasterboard with an ivory paper face, ideally suited to receive a plaster finish, or for direct decoration. Strong, versatile, and good value, Knauf Plasterboards have a conductivity figure of k = 0.16 W/mK. Knauf Wallboard complies fully with BS EN520 and is categorised as Type A.