Would buy it again especially from 1st class Travis Perkins
I must start with the excellent customer service and delivery service of Travis Perkins! I used the product on the staircase ceiling which was artexed. It cut clean and true and was manageable on my own. Plasterers came and skimmed it with no problems at all.
3 years ago
Robert
Type of purchase: DIY
Yes, I would recommend to a friend
1
1
5
I would purchase again
Ordered for an extension I'm having built.
3 years ago
Keith
0
0
5
Goods stuff, would recommend
I had a small section to replace, and this did the job just fine
4 years ago
Lester
0
0
5
Review of your purchases
just the right size to fit in my vehicle, good product, much easier to handle than a big sheet when fitting by hand alone.
Expamet 20mm Renderstop Bead 3000mm, manufactured from 0.4mm Stainless Steel.The product forms and protects the lower edge of external render. It can be used above doors, windows and at DPC level.
A strong and lightweight building board offering 30-240 minutes of fire protection, this Promat Supalux building board delivers 30 plus years of proven performance across many building applications. Made from calcium silicate, it comes reinforced with selected fibres and fillers for good impact resistance - ideal for industrial applications.
Range Description
PROMASEAL®
Brand Name
Promat
Manufacturer Model No
4191
Length
2440 mm
Thickness
9 mm
Width
1220 mm
Weight
30.15 kg
Colour
Off-White
Edge Detail
Square Edge
Moisture Resistant
Yes
Acoustic
No
Thermal Conductivity
0.17 W/mK
Fire Retardant
Yes
Fire Rating
A1
Coverage
2.97 m2
Certifications Met
Certifire CF420 (Ceilings, Membranes and Timber Floors) and Certifire CF420/A (Partitions and External Walls)
Used as the vertical support in wall framing, these products are available in a range of widths, lengths and gauge depending on requirements for strength, height, impact resistance and sound insulation. The Gypframe ‘C’ Stud design includes sight lines down the legs of the stud to ease board alignment and increase profile strength.
An economical friction-fit system to assemble frames for strong, compact, lightweight non load-bearing partitions. The metal stud partitioning is ideal for use in domestic and commercial situations, for heights up to 12m and a wide range of partition thicknesses.
Expamet 20mm Renderstop Bead 3000mm, manufactured from 0.4mm Stainless Steel.The product forms and protects the lower edge of external render. It can be used above doors, windows and at DPC level.
A strong and lightweight building board offering 30-240 minutes of fire protection, this Promat Supalux building board delivers 30 plus years of proven performance across many building applications. Made from calcium silicate, it comes reinforced with selected fibres and fillers for good impact resistance - ideal for industrial applications.
Used as the vertical support in wall framing, these products are available in a range of widths, lengths and gauge depending on requirements for strength, height, impact resistance and sound insulation. The Gypframe ‘C’ Stud design includes sight lines down the legs of the stud to ease board alignment and increase profile strength.
An economical friction-fit system to assemble frames for strong, compact, lightweight non load-bearing partitions. The metal stud partitioning is ideal for use in domestic and commercial situations, for heights up to 12m and a wide range of partition thicknesses.