Gyproc WallBoard 12.5 mm is a plasterboard in 12.5 mm thickness.
The plasterboard is made of a gypsum core between paper liners.
Use it in a single layer for most wall and ceiling applications where minimal levels of fire, structural and acoustic performance are specified, or in multiple layers for higher performance.
Glasroc F multiboard consists of gypsum incorporating a tissue of glass fibre immediately below the surface of the board. The core is reinforced with glass fibre rovings. Suitable for constructing all forms of partition and ceilings, including curved applications, giving high levels of fire and impact protection. Also offers increased levels of moisture performance. Can be used in semi-exposed situations such as eaves, canopies and carport under-linings.
Paper tape designed for reinforcing flat joints and internal angles. Can be applied manually or with the mechanical jointing systems. It has a centre crease, chamfered edges and spark perforations.
Gyproc WallBoard DUPLEX, backed with a vapour controlled membrane, is a high-quality and durable product. This wallboard features an aerated Gypsum centre, secured by bonded paper liners and polyester film.
With an Ivory-faced paper and metallised polyester film reverse, it can be used for wall and ceiling linings where vapour control and plasterboard lining are required in one fixing operation.
Gyproc WallBoard DUPLEX is a plasterboard that is suitable for dry lining internal surfaces.
Used as the vertical support in wall framing, these products are available in a range of widths, lengths and gauge depending on requirements for strength, height, impact resistance and sound insulation. The Gypframe ‘C’ Stud design includes sight lines down the legs of the stud to ease board alignment and increase profile strength.
Glasroc F multiboard consists of gypsum incorporating a tissue of glass fibre immediately below the surface of the board. The core is reinforced with glass fibre rovings. Suitable for constructing all forms of partition and ceilings, including curved applications, giving high levels of fire and impact protection. Also offers increased levels of moisture performance. Can be used in semi-exposed situations such as eaves, canopies and carport under-linings.
Paper tape designed for reinforcing flat joints and internal angles. Can be applied manually or with the mechanical jointing systems. It has a centre crease, chamfered edges and spark perforations.
Gyproc WallBoard DUPLEX, backed with a vapour controlled membrane, is a high-quality and durable product. This wallboard features an aerated Gypsum centre, secured by bonded paper liners and polyester film.
With an Ivory-faced paper and metallised polyester film reverse, it can be used for wall and ceiling linings where vapour control and plasterboard lining are required in one fixing operation.
Gyproc WallBoard DUPLEX is a plasterboard that is suitable for dry lining internal surfaces.
Used as the vertical support in wall framing, these products are available in a range of widths, lengths and gauge depending on requirements for strength, height, impact resistance and sound insulation. The Gypframe ‘C’ Stud design includes sight lines down the legs of the stud to ease board alignment and increase profile strength.