Suitable for most applications where normal fire, structural and acoustic levels are specified
Suitable for direct decorations or thistle plaster finish
The face (ivory) of Gyproc WallBoard can be plastered with either Thistle Board Finish or Thistle Multi-Finish. There should be the minimum of delay between completion of the lining and the commencement of plastering
After the joint treatment has dried, decoration, including any decorator’s preparatory work, should follow with the minimum delay
Has an ivory paper face for easy identification on site. Can be installed in single or in multi-layers to increase acoustic and fire performance.
Easily fixed to a wide range of materials
Can be fixed to various brick or masonry backgrounds by drywall adhesive
Conforms to ISO 9001:2008, ISO 14001:2004, BS OHSAS 18001:2007 and BES 6006
I purchased plasterboard and am very impressed with the service I received, easy website, excellent customer service and the delivery driver couldn't have been more helpful. I would definitely order fro Travis Perkins again.
5 years ago
Barbara
Type of purchase: DIY
Yes, I would recommend to a friend
0
0
5
Excellent purchase, delivered free, professional service.
Excellent purchase. Available in size and specification not available delivered free from other suppliers. Delivered free over value of £30 a bargain. The whole procedure was perfect, very professional, on date, on time, shrink wrapped on a pallet, on my drive. Will buy again when needed, Thanks.
Glasroc F multiboard consists of gypsum incorporating a tissue of glass fibre immediately below the surface of the board. The core is reinforced with glass fibre rovings. Suitable for constructing all forms of partition and ceilings, including curved applications, giving high levels of fire and impact protection. Also offers increased levels of moisture performance. Can be used in semi-exposed situations such as eaves, canopies and carport under-linings.
British Gypsum Glasroc Rigidur H is a Gypsum fibre plasterboard with additives for rigidity, durability and mechanical strength. High performance impact resistant gypsum fibre board for use in the GypWall EXTREME system. Gives high levels of sound insulation, Class A2 and Class 0 reaction to fire performance and excellent fixing strength. Offering superior mechanical strength, dimensional stability and environmental benefits, Rigidur H is a gypsum fibre board, manufactured from recycled paper fibre. It has been developed for high traffic applications and to meet the specialist requirements of modern methods of construction, including off-site manufacturing. The 100% recyclable board is also available in bespoke sizes for improved productivity and reduced jointing. This board has a coverage of 2.88m2
An economical friction-fit system to assemble frames for strong, compact, lightweight non load-bearing partitions. The metal stud partitioning is ideal for use in domestic and commercial situations, for heights up to 12m and a wide range of partition thicknesses.
Gyproc plasterboard in small easy-to-handle sizes.
Smaller easy-to-use, carry and install board with a specially modified liner and controlled suction. It enables easier fixing to 16” and 24” joist centres for ceiling lining. The board is suitable for direct decoration or a Thistle plaster finish. Length is compatible with both 16inch and 24inch joist centres, for ceiling linings.
Glasroc F multiboard consists of gypsum incorporating a tissue of glass fibre immediately below the surface of the board. The core is reinforced with glass fibre rovings. Suitable for constructing all forms of partition and ceilings, including curved applications, giving high levels of fire and impact protection. Also offers increased levels of moisture performance. Can be used in semi-exposed situations such as eaves, canopies and carport under-linings.
British Gypsum Glasroc Rigidur H is a Gypsum fibre plasterboard with additives for rigidity, durability and mechanical strength. High performance impact resistant gypsum fibre board for use in the GypWall EXTREME system. Gives high levels of sound insulation, Class A2 and Class 0 reaction to fire performance and excellent fixing strength. Offering superior mechanical strength, dimensional stability and environmental benefits, Rigidur H is a gypsum fibre board, manufactured from recycled paper fibre. It has been developed for high traffic applications and to meet the specialist requirements of modern methods of construction, including off-site manufacturing. The 100% recyclable board is also available in bespoke sizes for improved productivity and reduced jointing. This board has a coverage of 2.88m2
An economical friction-fit system to assemble frames for strong, compact, lightweight non load-bearing partitions. The metal stud partitioning is ideal for use in domestic and commercial situations, for heights up to 12m and a wide range of partition thicknesses.
Gyproc plasterboard in small easy-to-handle sizes.
Smaller easy-to-use, carry and install board with a specially modified liner and controlled suction. It enables easier fixing to 16” and 24” joist centres for ceiling lining. The board is suitable for direct decoration or a Thistle plaster finish. Length is compatible with both 16inch and 24inch joist centres, for ceiling linings.