Enhanced grip and adhesion to fully vitrified, porcelain, ceramic, quarry and natural stone tiles
Thin or thick bed adhesive - formulated for a fast track installation
Tiles can be grouted within approximately 2 to 3 hours after fixing, depending on conditions
Needs no flexible additives - just mix with water
Suitable for use with WBP 15mm plywood overlay
Suitable for use with underfloor heating
C2FT S1
For interior and exterior use
Technical specification
Suitable for
Suitable for wall and floor tiles including ceramic, quarry, porcelain, vitrified, natural stone and mosaics.
Also suitable for use with underfloor heating and WBP 15mm plywood overlay.
DOWSILâ„¢ 817 Mirror Adhesive is a high modulus neutral silicone sealant for internal fixation of mirrors, coated glass or metal panels onto various substrates and for bonding of glass and back plate in solar thermal panels.
Power Grab n Bond is a revolutionary product in the field of heavy-duty versatile bonding. Its formulation is based on our new CT1 product using our unique TRIBRID® polymer Technology. The density of Power Grab n Bond is far greater allowing phenomenal results in initial grab. Coupled with the rapid curing will in most applications reduce labour time by at least 50%.
BrickFix CE1 Grout (28NT) is a two part, ready-to-mix, cementitious thixotropic grout for bonding metal components (BrickFix Helical Bars) into masonry substrates. Applied by means of a grout pointing gun.
Ultracolor Plus grout can be used to enhance wall or floor tiled finishes both internally and externally with many added benefits such as anti-mould and water repellent features as well as being available in a wide range of colours. Suitable for use with almost all types of tile/mosaic. Not for use with metallic tiles or tiles with a soft glaze – if in doubt carry out a small trial area.
DOWSILâ„¢ 817 Mirror Adhesive is a high modulus neutral silicone sealant for internal fixation of mirrors, coated glass or metal panels onto various substrates and for bonding of glass and back plate in solar thermal panels.
Power Grab n Bond is a revolutionary product in the field of heavy-duty versatile bonding. Its formulation is based on our new CT1 product using our unique TRIBRID® polymer Technology. The density of Power Grab n Bond is far greater allowing phenomenal results in initial grab. Coupled with the rapid curing will in most applications reduce labour time by at least 50%.
BrickFix CE1 Grout (28NT) is a two part, ready-to-mix, cementitious thixotropic grout for bonding metal components (BrickFix Helical Bars) into masonry substrates. Applied by means of a grout pointing gun.
Ultracolor Plus grout can be used to enhance wall or floor tiled finishes both internally and externally with many added benefits such as anti-mould and water repellent features as well as being available in a wide range of colours. Suitable for use with almost all types of tile/mosaic. Not for use with metallic tiles or tiles with a soft glaze – if in doubt carry out a small trial area.