Free Click & Collect
Within One Hour
Delivery address
Collection branch
Ideas & Advice
VAT
EX
INC
Hover Over to Zoom In
Overview
- Breathable and long-lasting formulation
- Deeply penetrates brick, stone and mortar to form a durable bond
- Quick, one coat application by brush, roller or spray
Technical specification
Size
3 Litres
Interior or Exterior Use
Interior
Coverage per Litre
15 – 20 m2 per 5 litre bucket
Drying Time
30 mins
Time to Full Cure
24 hours
VOC Level
Low 0.3-7.1%
Colour
White
Type
Cream
Brand Name
Dryshield
Manufacturer Model No
DM-DRYSHIELD 3L
Data sheets
Reviews
Be the first to review this product.
Safeguard Stormdry XR-Mortar 310ml
Stormdry XR-Mortar is a semi-flexible polymer modified crack filling mortar for masonry. It can be used to seal cracks in bricks and masonry joints to prevent rain penetration or to repoint damaged areas of pointing in both internal and external environments. It is applied directly to the damaged area using a cartridge gun and nozzle to provide a waterproof barrier. It can also be used to plug damp proof course holes.
£22.31 each (Inc. VAT)
Safeguard Dryrod Damp Proofing Rods Kit 6M BBA Approved
Kit contains: x1 Dryrod 50 Box x1 Dryzone System Hole Clearing Tool - x1 Dryzone System Rod Cutting Tool- x1 Dryzone Drill Bit - 12mm x 300mm - x1 Stormdry Xr Mortar - No fuss, no mess, no stress. Dryrod is the next generation of rising damp treatment developed by Safeguard Europe Ltd. The patented, BBA approved 12mm diameter DIY damp proofing rods carry a powerful water repellent material, which cures to form a powerful barrier to rising damp. Once they are inserted, the rods will start to dry out the wall by slowly diffusing water repellent deep into the damp masonry, curing to form a powerful barrier to further rising damp. Installation: Simply insert the 9" rods into a series of 12mm holes drilled into the lowest available continuous mortar course of the wall. No specialist pumps or mastic guns required. A normal hammer drill will suffice. Once installed they diffuse the active ingredient deep into the wall before it cures to form a water-repellent chemical damp course. Advantages over other methods: The most effective rising damp treatment available - Proven to work even up to 95% saturation Quick & easy to install DIY rising damp treatment - Simply drill holes & insert the damp-proofing rods to form a new chemical damp course. No mess to clean up - The active ingredient is contained within the rods so there's no chance of messy spillages that occur with other solutions for damp proofing for walls.
£148.32 each (Inc. VAT)
Sika 4A Waterstop Leak Sealing Admixture 5L
Sika 4a Waterstop is a rapid setting, ready to use waterproofing admixture which can be used to produce a paste for leak stopping against high water pressure infiltration when mixed with water and ordinary Portland cement.
£112.42 each (Inc. VAT)
Denso Tape Synthetic Fibre 50mm x 10m
The original Denso pipe repair tape for protection below ground or underwater against corrosion on pipework, metal surfaces and cables and temporary sealing of fractured mains and cable joints.
£15.38 each (Inc. VAT)