Salt-resistant cementitious tanking compound for the protection of structures against water from the ground, and which may be subject to hydrostatic pressure
Can be applied on the negative and positive sides of the structures
Withstands greater than 10 bars of pressure
Minimum thickness of 2mm per coating
Technical specification
Size
25 kg
Material
Blend of Cement, Portland Cement, Additives, Flue Dust
Colour
Grey
Usage
Salt-resistant cementitious tanking compound for protecting structures from water ingress and hydrostatic pressure. Suitable for internal (negative) and external (positive) applications, waterproofing basements, cellars, water tanks, bunds, pools, and salt-contaminated walls
Coverage
Varies Depending on Subrstate and Application Method
Drybase Tanking Slurry is a cementitious, ready-mixed surface waterproofer. The waterproofing function is achieved by a unique composition of cement, graded quartz sand and selected additives. It can be used against active and passive water pressures. The initial and final bonding capability of Drybase Tanking Slurry is excellent, making it suitable to be applied to horizontal as well as vertical surfaces. It is durable, resistant to frost and heat after setting, but also permeable to vapour. Drybase Tanking Slurry is tested for use in contact with drinking water.
Size
25 kg
Coverage per Litre
3 – 4 kg/m2, thickness 1.5 – 2 mm for pressureless water
Drybase Tanking Slurry is a cementitious, ready-mixed surface waterproofer. The waterproofing function is achieved by a unique composition of cement, graded quartz sand and selected additives. It can be used against active and passive water pressures. The initial and final bonding capability of Drybase Tanking Slurry is excellent, making it suitable to be applied to horizontal as well as vertical surfaces. It is durable, resistant to frost and heat after setting, but also permeable to vapour. Drybase Tanking Slurry is tested for use in contact with drinking water.
Size
20kg
Interior or Exterior Use
Interior
Coverage per Litre
A 20kg bag of powder will cover 3.5 - 5 m2, applied in two coats at 1 - 2 mm thickness each.
A high-performance cementitious waterproofing system designed for basements, cellars, and other below-ground structures that can withstand up to 5-bar water pressure. Supplied as a two-part kit with pre-measured cementitious powder and liquid polymer components, it produces a dense, durable slurry tested to withstand up to 5 bar hydrostatic water pressure (equivalent to 50 metres below ground). The polymer additive improves workability, bond strength and flexibility, making the kit suitable for internal tanking in both new-build and retrofit settings. Once mixed, it can be applied to damp masonry and concrete walls and floors using a trowel or brush in two coats. Ideal for areas prone to movement or salt efflorescence. Compliant with BS 8102:2022 as a Type A barrier system.
Size
12kg
Interior or Exterior Use
Interior
Coverage per Litre
Pressureless water: 3.5 – 4.5 kg/m², water under pressure: 3.5 – 5.5 kg/m²
Sovereign WeatherChek Facade Cream is an easy-to-use water repellent for protecting external masonry from penetrating damp and freeze-thaw damage. The viscous emulsion of silane and siloxanes penetrates and impregnates porous masonry to produce a water-repellent surface. WeatherChek Facade Cream can be applied with a spray, brush or roller to porous masonry such as brick, mortar, render, limestone and sandstone. Reducing the porosity of masonry also results in reduced heat transfer, improving the thermal properties of a dwelling. WeatherChek Facade Cream also does not prevent a wall from breathing.
Drybase Tanking Slurry is a cementitious, ready-mixed surface waterproofer. The waterproofing function is achieved by a unique composition of cement, graded quartz sand and selected additives. It can be used against active and passive water pressures. The initial and final bonding capability of Drybase Tanking Slurry is excellent, making it suitable to be applied to horizontal as well as vertical surfaces. It is durable, resistant to frost and heat after setting, but also permeable to vapour. Drybase Tanking Slurry is tested for use in contact with drinking water.
Drybase Tanking Slurry is a cementitious, ready-mixed surface waterproofer. The waterproofing function is achieved by a unique composition of cement, graded quartz sand and selected additives. It can be used against active and passive water pressures. The initial and final bonding capability of Drybase Tanking Slurry is excellent, making it suitable to be applied to horizontal as well as vertical surfaces. It is durable, resistant to frost and heat after setting, but also permeable to vapour. Drybase Tanking Slurry is tested for use in contact with drinking water.
A high-performance cementitious waterproofing system designed for basements, cellars, and other below-ground structures that can withstand up to 5-bar water pressure. Supplied as a two-part kit with pre-measured cementitious powder and liquid polymer components, it produces a dense, durable slurry tested to withstand up to 5 bar hydrostatic water pressure (equivalent to 50 metres below ground). The polymer additive improves workability, bond strength and flexibility, making the kit suitable for internal tanking in both new-build and retrofit settings. Once mixed, it can be applied to damp masonry and concrete walls and floors using a trowel or brush in two coats. Ideal for areas prone to movement or salt efflorescence. Compliant with BS 8102:2022 as a Type A barrier system.
Sovereign WeatherChek Facade Cream is an easy-to-use water repellent for protecting external masonry from penetrating damp and freeze-thaw damage. The viscous emulsion of silane and siloxanes penetrates and impregnates porous masonry to produce a water-repellent surface. WeatherChek Facade Cream can be applied with a spray, brush or roller to porous masonry such as brick, mortar, render, limestone and sandstone. Reducing the porosity of masonry also results in reduced heat transfer, improving the thermal properties of a dwelling. WeatherChek Facade Cream also does not prevent a wall from breathing.