Free Click & Collect
Within One Hour
Delivery address
Collection branch
Ideas & Advice
VAT
EX
INC
Safeguard Drybase Waterproof Plugging Compound 7.5kg
Hover Over to Zoom In
Frequently bought together
Overview
- Durable and high performance plugging compound
- Stop active water leaks on concrete
- Rapid 30 second setting time
- Pre-gauged and ready to mix
- For both indoors and outdoors
- Erosion resistant shoring of canal sealing
Technical specification
Size
7.5kg
Interior or Exterior Use
Interior
Drying Time
30 seconds
Time to Full Cure
30 seconds
VOC Level
Minimal 0-0.29%
Colour
Grey
Type
Plugging Compound
Manufacturer Model No
TK-DRYBASE WATERPRF PLUG 7.5KG
Brand Name
Safeguard
Data sheets
Reviews
Be the first to review this product.
Safeguard Drybase TS-Plus Tanking Slurry 20kg & 5-bar Waterproofer 4L
Drybase Tanking Slurry is a cementitious, ready-mixed surface waterproofer. The waterproofing function is achieved by a unique composition of cement, graded quartz sand and selected additives. It can be used against active and passive water pressures. The initial and final bonding capability of Drybase Tanking Slurry is excellent, making it suitable to be applied to horizontal as well as vertical surfaces. It is durable, resistant to frost and heat after setting, but also permeable to vapour. Drybase Tanking Slurry is tested for use in contact with drinking water.
£51.84 each (Inc. VAT)
Safeguard Dryrod Damp Proofing Rods Kit 6M BBA Approved
Kit contains: x1 Dryrod 50 Box x1 Dryzone System Hole Clearing Tool - x1 Dryzone System Rod Cutting Tool- x1 Dryzone Drill Bit - 12mm x 300mm - x1 Stormdry Xr Mortar - No fuss, no mess, no stress. Dryrod is the next generation of rising damp treatment developed by Safeguard Europe Ltd. The patented, BBA approved 12mm diameter DIY damp proofing rods carry a powerful water repellent material, which cures to form a powerful barrier to rising damp. Once they are inserted, the rods will start to dry out the wall by slowly diffusing water repellent deep into the damp masonry, curing to form a powerful barrier to further rising damp. Installation: Simply insert the 9" rods into a series of 12mm holes drilled into the lowest available continuous mortar course of the wall. No specialist pumps or mastic guns required. A normal hammer drill will suffice. Once installed they diffuse the active ingredient deep into the wall before it cures to form a water-repellent chemical damp course. Advantages over other methods: The most effective rising damp treatment available - Proven to work even up to 95% saturation Quick & easy to install DIY rising damp treatment - Simply drill holes & insert the damp-proofing rods to form a new chemical damp course. No mess to clean up - The active ingredient is contained within the rods so there's no chance of messy spillages that occur with other solutions for damp proofing for walls.
£148.32 each (Inc. VAT)
Sika Grey Damp Proofing Slurry 25kg
Sika Damp-proofing Slurry is a ready to use (just add water), high quality, thin layer waterproof slurry coating, based on special cements and admixtures to provide a water and damp proof finish.
£59.11 each (Inc. VAT)
Safeguard Stormdry Max Waterproofing 1L
Stormdry MAX Enhanced Waterproofing Barrier is a clear gel coating providing lasting waterproofing, crack-bridging and anti-graffiti protection. It can be used on masonry, stone, concrete, selected metals and painted surfaces. It can be used as a top coat for Stormdry Masonry Protection Cream when multiple fine cracking is seen on the wall surface. Stormdry Max bridges cracks up to 0.6 mm wide providing protection against penetrating damp, giving up to 10 years weather protection. In anti-graffiti application, it will take up to 15 wash cycles to eliminate any graffiti applied to the surface coating and offers low-level flood resistance. The clear liquid is air moisture curing and is ready for use. It can be applied by brush and roller. The coating is partially breathable and gives a semi-gloss appearance which fades with time.
£46.76 each (Inc. VAT)