Manthorpe Blue/Black Combination Airbrick 9in x 3in
916411
Hover Over to Zoom In
Overview
Provides high levels of ventilation into cavity walls and under floor voids
Provides 7,600mm2 of airflow per 9x3in airbrick
Can be stacked to produce 9x6in and 9x9in
The brick incorporates a front mounted grille to prohibit large insects gaining access but wide enough not to be blocked by debris, paint or water droplets
A mortar key around the edge of the airbrick ensures secure adhesion to the building fabric while a clip together facility provides a choice of ventilation sizes
Provides an unobtrusive solution to cavity wall drainage requirements.
This item is a plastic component and therefore not suitable for use within the external walls of high-rise buildings requiring non-combustible materials, i.e. those 18m high or more complying to Regulation 7(2) and Approved Document B, and those 11m high or more complying to 2.7 of Building (Scotland) technical handbook 2019.
Used to drain lintels, Cavity Trays, and to ventilate cavity walls
This item is a plastic component and therefore not suitable for use within the external walls of high-rise buildings requiring non-combustible materials, i.e. those 18m high or more complying to Regulation 7(2) and Approved Document B, and those 11m high or more complying to 2.7 of Building (Scotland) technical handbook 2019.
IKO Hyload Original Damp-proof Course system is a flexible polymeric sheet material, used within masonry walls to prevent passage of moisture from the ground and at all levels as cavity tray to prevent the downward movement of water.Trusted for over 40 years, Hyload Original is the UK’s leading High Performance DPC
IKO Hyload Tanking Membrane 2000SA is a self-adhesive modified bitumen sheet material, that can be used as a fully bonded damp proofing membrane and as Type A Barrier Membrane protection within a structural waterproofing system designed to be compliant with the guidance of BS8102:2009.
Provides an unobtrusive solution to cavity wall drainage requirements.
This item is a plastic component and therefore not suitable for use within the external walls of high-rise buildings requiring non-combustible materials, i.e. those 18m high or more complying to Regulation 7(2) and Approved Document B, and those 11m high or more complying to 2.7 of Building (Scotland) technical handbook 2019.
Used to drain lintels, Cavity Trays, and to ventilate cavity walls
This item is a plastic component and therefore not suitable for use within the external walls of high-rise buildings requiring non-combustible materials, i.e. those 18m high or more complying to Regulation 7(2) and Approved Document B, and those 11m high or more complying to 2.7 of Building (Scotland) technical handbook 2019.
IKO Hyload Original Damp-proof Course system is a flexible polymeric sheet material, used within masonry walls to prevent passage of moisture from the ground and at all levels as cavity tray to prevent the downward movement of water.Trusted for over 40 years, Hyload Original is the UK’s leading High Performance DPC
IKO Hyload Tanking Membrane 2000SA is a self-adhesive modified bitumen sheet material, that can be used as a fully bonded damp proofing membrane and as Type A Barrier Membrane protection within a structural waterproofing system designed to be compliant with the guidance of BS8102:2009.