A watertight low-profile sheet membrane for protection against dampness in walls without the need to drill and install plugs. The membrane is a 1.5 mm thick flexible polypropylene sheet with a fleeced surface on both sides. The two fleeces ensure good adhesion to the wall by means of Drybase Flex Adhesive, as well as the direct application of plaster to the face.
Size
1.2 × 15 m
Length
15 m
Thickness
1.5 mm
Width
1.2 m
Weight
9.6
Material
Fleece
Colour
Black
Coverage
1 × 15 m
Pack Quantity
1
Certifications Met
ISO 9001, ISO 14001, Fire Rating: Class F (EN 13501)
Sovereign Corner Strip is a synthetic butyl/rubber based extruded strip sealant laminated with a PVC liner. It is primarily used for creating a seal over joints between SovDrain membranes, as part of the SovDrain waterproofing system.
Size
150mm x 20m
Length
20m
Thickness
1mm
Width
150mm
Material
Synthetic Butyl/Rubber-based Extruded Strip Sealant with PVC Liner
A high-quality butyl tape that links overlapping cavity drainage membrane sections. It forms a strong waterproof seal between membrane sections in both wall and floor joints.
Drybase Plaster Mesh Membrane LP is produced using high-quality Polypropylene material and provides a barrier to moisture, salts and vapour. It is a slimline membrane with 2.5mm studs on the rear that enables the management of moisture without significantly reducing room space. A plastic mesh is welded to the front surface of the membrane, allowing it to accept plaster coats via standard trowel application or as a base for dot and dab plasterboard application.
A watertight low-profile sheet membrane for protection against dampness in walls without the need to drill and install plugs. The membrane is a 1.5 mm thick flexible polypropylene sheet with a fleeced surface on both sides. The two fleeces ensure good adhesion to the wall by means of Drybase Flex Adhesive, as well as the direct application of plaster to the face.
Sovereign Corner Strip is a synthetic butyl/rubber based extruded strip sealant laminated with a PVC liner. It is primarily used for creating a seal over joints between SovDrain membranes, as part of the SovDrain waterproofing system.
A high-quality butyl tape that links overlapping cavity drainage membrane sections. It forms a strong waterproof seal between membrane sections in both wall and floor joints.
Drybase Plaster Mesh Membrane LP is produced using high-quality Polypropylene material and provides a barrier to moisture, salts and vapour. It is a slimline membrane with 2.5mm studs on the rear that enables the management of moisture without significantly reducing room space. A plastic mesh is welded to the front surface of the membrane, allowing it to accept plaster coats via standard trowel application or as a base for dot and dab plasterboard application.