Sovereign CDM3 Lath/Mesh Membrane provides a robust drainage membrane suitable for use above and below ground on walls, floors and arched/vaulted ceilings, as part of the SovDrain waterproofing system. This membrane has a low stud profile (3mm), thus minimising wall and floor level changes.
Sovereign Membrane Plugs are manufactured from glass filled polyamide, giving a high strength and corrosion resistant fixing. They are intended for use in damp proofing and waterproofing applications, to secure SovDrain membranes to the substrate, as part of the SovDrain waterproofing system. The plugs must be sealed using SovDrain Sealing Rope to the underside of the plug head in all below ground applications. Sovereign CDM8 plugs can be used in above ground situations, which includes a rubber sealing washer already installed onto the plug.
Sovereign CDM3 Lath/Mesh Membrane provides a robust drainage membrane suitable for use above and below ground on walls, floors and arched/vaulted ceilings, as part of the SovDrain waterproofing system. This membrane has a low stud profile (3mm), thus minimising wall and floor level changes.
H+HÕs Celcon Blocks High Strength Grade (7.3N/mm2 Ð identified with a black stripe on the block) is ideal where higher compressive strengths are required such as in the foundations and lower storeys of three storey buildings, piers under high vertical loads and in multi-storey buildings.
Sovereign CDM3 Lath/Mesh Membrane provides a robust drainage membrane suitable for use above and below ground on walls, floors and arched/vaulted ceilings, as part of the SovDrain waterproofing system. This membrane has a low stud profile (3mm), thus minimising wall and floor level changes.
Sovereign Membrane Plugs are manufactured from glass filled polyamide, giving a high strength and corrosion resistant fixing. They are intended for use in damp proofing and waterproofing applications, to secure SovDrain membranes to the substrate, as part of the SovDrain waterproofing system. The plugs must be sealed using SovDrain Sealing Rope to the underside of the plug head in all below ground applications. Sovereign CDM8 plugs can be used in above ground situations, which includes a rubber sealing washer already installed onto the plug.
Sovereign CDM3 Lath/Mesh Membrane provides a robust drainage membrane suitable for use above and below ground on walls, floors and arched/vaulted ceilings, as part of the SovDrain waterproofing system. This membrane has a low stud profile (3mm), thus minimising wall and floor level changes.
H+HÕs Celcon Blocks High Strength Grade (7.3N/mm2 Ð identified with a black stripe on the block) is ideal where higher compressive strengths are required such as in the foundations and lower storeys of three storey buildings, piers under high vertical loads and in multi-storey buildings.