The NDC Polipak DPC 225mm x 30m Damp Proof Course is produced from 100% recycled polythene and meets the standards set forth in BS 6515 (1984). Additionally, it is CE marked in accordance with EN14909 (2012). This product is appropriate for application in brick, stone, and concrete walls. The Damplas DPC is designed to provide a robust damp proof barrier that effectively prevents moisture ingress within structural walls.
Dedicated corner section for the weberwall brick system combining full and half bricks to make finishing corners straightforward. Weberwall brick can be used to create a realistic brick finish across a range of different applications and substrates with significant reductions in weight and application costs.
Drybase Plaster Mesh Membrane LP is produced using high-quality Polypropylene material and provides a barrier to moisture, salts and vapour. It is a slimline membrane with 2.5mm studs on the rear that enables the management of moisture without significantly reducing room space. A plastic mesh is welded to the front surface of the membrane, allowing it to accept plaster coats via standard trowel application or as a base for dot and dab plasterboard application.
Sovereign CDM8 Membrane Lath Plugs are manufactured from polypropylene, giving a corrosion resistant fixing. They are intended for use in damp proofing and waterproofing applications, to secure SovDrain lath membranes to the substrate, as part of the SovDrain waterproofing system.
The NDC Polipak DPC 225mm x 30m Damp Proof Course is produced from 100% recycled polythene and meets the standards set forth in BS 6515 (1984). Additionally, it is CE marked in accordance with EN14909 (2012). This product is appropriate for application in brick, stone, and concrete walls. The Damplas DPC is designed to provide a robust damp proof barrier that effectively prevents moisture ingress within structural walls.
Dedicated corner section for the weberwall brick system combining full and half bricks to make finishing corners straightforward. Weberwall brick can be used to create a realistic brick finish across a range of different applications and substrates with significant reductions in weight and application costs.
Drybase Plaster Mesh Membrane LP is produced using high-quality Polypropylene material and provides a barrier to moisture, salts and vapour. It is a slimline membrane with 2.5mm studs on the rear that enables the management of moisture without significantly reducing room space. A plastic mesh is welded to the front surface of the membrane, allowing it to accept plaster coats via standard trowel application or as a base for dot and dab plasterboard application.
Sovereign CDM8 Membrane Lath Plugs are manufactured from polypropylene, giving a corrosion resistant fixing. They are intended for use in damp proofing and waterproofing applications, to secure SovDrain lath membranes to the substrate, as part of the SovDrain waterproofing system.