Free Click & Collect
Within One Hour
Delivery address
Collection branch
Ideas & Advice
VAT
EX
INC
Hollow Dense Concrete Block 7.3N 215mm
4.8
40 Reviews
Hover Over to Zoom In
Frequently bought together
Overview
- Suitable for a wide variety of applications
- Ideal for high strength load-bearing walls
- Secure base for fixings
- Reduced unit weight for ease of handling
- Reduced floor/ foundation loadings
- High levels of fire resistance and sound insulation
Technical specification
Manufacturer Model No
1789
Brand Name
Cemex
Made To Order
N
Height
215 mm
Length
440 mm
Width
215 mm
Weight
27.50 kg
Colour
Grey
Compressive Strength
7.30 N per mm2
Fire Rating
Class A0
BBA Approved
Yes
Type
Lightweight Block
Reviews
4.8
40 Reviews
Most liked review
Would use shop again.
It works for what I need it to. Staff were helpful and prompt.
H+H Celcon Standard Foundation Aerated Concrete Block 440 x 215 x 355mm 3.6N
Order in singles. See Tech Spec for pack quantity. Celcon Standard grade is extremely versatile and can be used below DPC as infill for Beam and Block flooring systems, as well as above the ground in walling applications
£15.28 each (Inc. VAT)
Ibstock Chesterton Class B Red 65mm Engineering Brick Pack of 500
The Ibstock Red Engineering Class B Brick is a high-strength, low water absorption brick designed for structural applications. Manufactured using a perforated, wirecut process, it offers exceptional compressive strength, making it ideal for foundations, retaining walls, and other load-bearing projects. Its low water absorption reduces the risk of frost damage and enhances durability. As an engineering brick, it is specified for its performance rather than its appearance, meaning it is not intended for facing work. Where aesthetics are a priority, a facing brick should be used instead. Please note this product is produced in Ibstocks Chesterton factory and is therefore more suited to counties in the Midlands & South
£405.24 per pack (Inc. VAT)
H+H Celcon Hi-7 Aerated Concrete Block 7.3N 100mm
H+HÕs Celcon Blocks High Strength Grade (7.3N/mm2 Ð identified with a black stripe on the block) is ideal where higher compressive strengths are required such as in the foundations and lower storeys of three storey buildings, piers under high vertical loads and in multi-storey buildings.
£5.38 each (Inc. VAT)
H+H Celcon Standard Aerated Concrete Foundation Block 3.6N 300mm
Available in Standard Grade (3.6N/mm2) and High Strength Grade (7.3N/mm2). Foundation Blocks can be used to support 3 storey constructions. They are suitable for the support of solid or cavity walls, framed construction or suspended floors, including beam and block.
£11.77 each (Inc. VAT)