Free Click & Collect
Within One Hour
Delivery address
Collection branch
Ideas & Advice
VAT
EX
INC
Simpson Strong-Tie Masonry Supported Joist Hanger 200 mm x 75 mm JHM200/75
Hover Over to Zoom In
Frequently bought together
Overview
- Built-in inspection slot at the base of the hanger to aid inspection from the ground
- Top flange provides widest area in contact with masonry support allowing superior performance.
- Embossments on JHM stiffen top flange and holes allow improved mortar keying.
- Safe working load for joists shot fired to steel girders is 5.17kN
- Made from pre-galvanised mild steel
- HM side flange on deeper hangers is much higher than traditional style, providing greatly enhanced resistance to joist rotation.
- Masonry Supported 200mm, Joist Hanger
Technical specification
Height
190 mm
Thickness
2 mm
Width
146 mm
Material
Pre-Galvanised Steel
Colour
Steel
Finish
Galvanised
Pack Quantity
1
Type
Joist Hanger
Range Description
Builder Metalwork
Brand Name
Simpson Strong-Tie
Manufacturer Model No
JHM200/75
Made To Order
N
Data sheets
Reviews
Be the first to review this product.
Simpson JHA270/75 Timber to Timber Joist Hanger
JHAs are height-adjustable joist hangers used to support timber joists from timber members. This can be fitted quickly and accurately due to the adjustable height strap, location tab, and speed prongs.
This product is the standard leg (JHA270) version and can be installed directly on the bearing joist or wrapped over the top to achieve higher performance.
£1.87 each (Inc. VAT)
Ancon Staifix STF6 Timber Frame Cavity Wall Tie Box 100
Type 6 cranked cavity wall tie for use in the construction of timber-framed buildings up to 4 storeys in height. Supplied complete with an annular ring shank nail.
£96.00 per box (Inc. VAT)
Staifix Starter Tie 135mm Bag of 10
Screw in Starter Ties are supplied with an 8mm nylon plug and is suitable for use in brickwork and blockwork of up to 3 storeys or 8 metres in height.
£7.15 each (Inc. VAT)
Simpson Strong-Tie HES10B10 1000mm Heavy Engineered Bent at 100mm
A direct replacement for traditional restraint straps, the innovative design of these lightweight straps allows ease of handling and installation whilst maintaining the structural strength and robustness of much heavier weight types.
The HES (heavy engineered strap) replace the traditional heavy (30 x 5mm) restraint straps in roof and floor construction.
Reduced thickness allows the HES strap to span the bottom chords of trusses and over floor joists without the need for notching.
HES straps are less than 40% of the weight, quicker to fit, and overcome many fixing problems associated with traditional heavy straps.
£8.77 each (Inc. VAT)