Free Click & Collect
Within One Hour
Delivery address
Collection branch
Ideas & Advice
VAT
EX
INC
Simpson Strong-Tie Masonry Supported Joist Hanger 225 mm x 75 mm JHM225/75
Hover Over to Zoom In
Frequently bought together
Overview
- Built-in inspection slot at the base of the hanger to aid inspection from the ground
- Top flange provides widest area in contact with masonry support allowing superior performance
- Embossments on JHM stiffen top flange and holes allow improved mortar keying
- Safe working load for joists shot fired to steel girders is 5.17kN
- Made from pre-galvanised mild steel
- Up to 10kN Safe Working Load
- JHM side flange on deeper hangers is much higher than traditional style, providing greatly enhanced resistance to joist rotation.
Technical specification
Height
225 mm
Thickness
2 mm
Width
75 mm
Material
Pre-Galvanised Steel
Finish
Galvanised
Pack Quantity
1
Type
Joist Hanger
Manufacturer Model No
JHM
Brand Name
Simpson Strong-Tie
Range Description
Builder Metalwork
Data sheets
Reviews
Be the first to review this product.
Simpson JHA270/75 Timber to Timber Joist Hanger
JHAs are height-adjustable joist hangers used to support timber joists from timber members. This can be fitted quickly and accurately due to the adjustable height strap, location tab, and speed prongs.
This product is the standard leg (JHA270) version and can be installed directly on the bearing joist or wrapped over the top to achieve higher performance.
£1.68 each (Inc. VAT)
Simpson JHA450/47 Timber to Timber Joist Hanger
JHA is a joist hanger that allows timber joists to be supported from timber members at different heights.
In the long-leg (JHA450) versions, the joist can be installed directly on the face of the carrying joist or it can be wrapped over the top for increased performance.
£4.46 each (Inc. VAT)
Simpson Strong-tie HES15B10 1500mm Heavy Engineered Bent at 100mm
Light and heavy restraint straps for vertical and horizontal restraints when connecting timber floors and roof systems to masonry walls
£11.00 each (Inc. VAT)
Simpson Strong-Tie HES10B10 1000mm Heavy Engineered Bent at 100mm
A direct replacement for traditional restraint straps, the innovative design of these lightweight straps allows ease of handling and installation whilst maintaining the structural strength and robustness of much heavier weight types.
The HES (heavy engineered strap) replace the traditional heavy (30 x 5mm) restraint straps in roof and floor construction.
Reduced thickness allows the HES strap to span the bottom chords of trusses and over floor joists without the need for notching.
HES straps are less than 40% of the weight, quicker to fit, and overcome many fixing problems associated with traditional heavy straps.
£7.87 each (Inc. VAT)