Free Click & Collect
Within One Hour
Delivery address
Collection branch
Ideas & Advice
VAT
EX
INC
Hover Over to Zoom In
Frequently bought together
Overview
- Breathable and long-lasting formulation
- Deeply penetrates brick, stone and mortar to form a durable bond
- Quick, one coat application by brush, roller or spray
Technical specification
Size
1 Litre
Interior or Exterior Use
Interior
Coverage per Litre
3 – 4 m2 per 1 litre tin
Drying Time
30 mins
Time to Full Cure
24 hours
VOC Level
Low 0.3-7.1%
Colour
White
Type
Cream
Manufacturer Model No
DM-DRYSHIELD 1L
Brand Name
Safeguard
Data sheets
Reviews
Be the first to review this product.
Safeguard Drybase Tanking Slurry Bba 25 Kg
Drybase Tanking Slurry is a cementitious, ready-mixed surface waterproofer. The waterproofing function is achieved by a unique composition of cement, graded quartz sand and selected additives. It can be used against active and passive water pressures. The initial and final bonding capability of Drybase Tanking Slurry is excellent, making it suitable to be applied to horizontal as well as vertical surfaces. It is durable, resistant to frost and heat after setting, but also permeable to vapour. Drybase Tanking Slurry is tested for use in contact with drinking water.
£59.06 each (Inc. VAT)
Safeguard Dryrod Damp Proofing Rods Kit 6M BBA Approved
Kit contains: x1 Dryrod 50 Box x1 Dryzone System Hole Clearing Tool - x1 Dryzone System Rod Cutting Tool- x1 Dryzone Drill Bit - 12mm x 300mm - x1 Stormdry Xr Mortar - No fuss, no mess, no stress. Dryrod is the next generation of rising damp treatment developed by Safeguard Europe Ltd. The patented, BBA approved 12mm diameter DIY damp proofing rods carry a powerful water repellent material, which cures to form a powerful barrier to rising damp. Once they are inserted, the rods will start to dry out the wall by slowly diffusing water repellent deep into the damp masonry, curing to form a powerful barrier to further rising damp. Installation: Simply insert the 9" rods into a series of 12mm holes drilled into the lowest available continuous mortar course of the wall. No specialist pumps or mastic guns required. A normal hammer drill will suffice. Once installed they diffuse the active ingredient deep into the wall before it cures to form a water-repellent chemical damp course. Advantages over other methods: The most effective rising damp treatment available - Proven to work even up to 95% saturation Quick & easy to install DIY rising damp treatment - Simply drill holes & insert the damp-proofing rods to form a new chemical damp course. No mess to clean up - The active ingredient is contained within the rods so there's no chance of messy spillages that occur with other solutions for damp proofing for walls.
£148.32 each (Inc. VAT)
Dryzone Targeted Treatment Damp ProCourse Cream - Box 10
Dryzone is a special damp proofing cream that is introduced along the mortar course at regular intervals by injecting it into pre-drilled holes. The Dryzone then diffuses before curing to form a continuous water repellent barrier. This prevents the damp from rising up the wall.
£221.76 per box (Inc. VAT)
Safeguard Drybase Waterproof Plugging Compound 3kg
A cementitious, ready-mixed, rapid setting compound to stop water and moisture ingress. Drybase Waterproofing Plug can be used internally or externally as a waterproof plugging mortar or where rapid setting and early strength gain is required: Plugging water leaks and seepage. Sealing leaking cracks. Sealing wet surfaces. Plugging leaks in earthenware pipes. Caulking tunnel segment joints. Fixings in water structures where immediate use is required.
£25.91 each (Inc. VAT)