Free Click & Collect
Within One Hour
Delivery address
Collection branch
Ideas & Advice
VAT
EX
INC
Hover Over to Zoom In
Frequently bought together
Overview
- Complete 3-stage mould removal system for cleaning, stain removal and surface sanitisation
- Dryzone Mould Eliminator removes visible black mould in under 3 minutes with minimal effort
- Dryzone Mould Remover Gel clings to grout, sealants and vertical surfaces to tackle embedded stains
- Dryzone 100 Mould Sanitiser kills 99.9% of mould spores, bacteria and viruses, helping to prevent regrowth
- Suitable for use on tiles, walls, uPVC, sealants and around windows or showers
Technical specification
Size
1050ml
Interior or Exterior Use
Interior
VOC Level
Minimal 0-0.29%
Colour
Clear
Type
Anti-Mould Kit
Manufacturer Model No
KT-A00093-001
Brand Name
Safeguard
Data sheets
Reviews
Be the first to review this product.
Sika Frosterproofer 1L
Sika MaxMix Frostproofer & Accelerator is a liquid admixture for mortars and concrete. It can be used in all situations where reduced setting time is required. For working at temperatures down to -2 degrees. 1 litre treats up to 100kg of cement.
£19.67 each (Inc. VAT)
Sika 2 Waterplug Leak Sealing Admixture 5L
Sika®-2 Water Plug is a ready to use very rapid setting leak stopping liquid which is mixed with ordinary portland cement to produce a paste for immediate leak sealing against high water pressure infiltration.
£75.48 each (Inc. VAT)
Safeguard Dryrod Damp Proofing Rods Kit 6M BBA Approved
Kit contains: x1 Dryrod 50 Box x1 Dryzone System Hole Clearing Tool - x1 Dryzone System Rod Cutting Tool- x1 Dryzone Drill Bit - 12mm x 300mm - x1 Stormdry Xr Mortar - No fuss, no mess, no stress. Dryrod is the next generation of rising damp treatment developed by Safeguard Europe Ltd. The patented, BBA approved 12mm diameter DIY damp proofing rods carry a powerful water repellent material, which cures to form a powerful barrier to rising damp. Once they are inserted, the rods will start to dry out the wall by slowly diffusing water repellent deep into the damp masonry, curing to form a powerful barrier to further rising damp. Installation: Simply insert the 9" rods into a series of 12mm holes drilled into the lowest available continuous mortar course of the wall. No specialist pumps or mastic guns required. A normal hammer drill will suffice. Once installed they diffuse the active ingredient deep into the wall before it cures to form a water-repellent chemical damp course. Advantages over other methods: The most effective rising damp treatment available - Proven to work even up to 95% saturation Quick & easy to install DIY rising damp treatment - Simply drill holes & insert the damp-proofing rods to form a new chemical damp course. No mess to clean up - The active ingredient is contained within the rods so there's no chance of messy spillages that occur with other solutions for damp proofing for walls.
£148.32 each (Inc. VAT)
Dryzone Targeted Treatment Damp ProCourse Cream - Box 10
Dryzone is a special damp proofing cream that is introduced along the mortar course at regular intervals by injecting it into pre-drilled holes. The Dryzone then diffuses before curing to form a continuous water repellent barrier. This prevents the damp from rising up the wall.
£221.76 per box (Inc. VAT)