Stormdry Masonry Protection Cream is a deeply penetrating water-repellent silicone cream for the protection of masonry. The thick, white cream is ready to use and applied by brush, roller or airless spray. It penetrates into brickwork, masonry, mortar and concrete, where it will cure to a colourless, natural finish, lasting for over 25 years. Stormdry Cream can help improve the energy efficiency of dwellings by reducing heat loss.
Dryzone is a special damp proofing cream that is introduced along the mortar course at regular intervals by injecting it into pre-drilled holes. The Dryzone then diffuses before curing to form a continuous water repellent barrier. This prevents the damp from rising up the wall.
When a new damp-proof course has been installed it will normally be necessary to hack off salt contaminated plaster and to replaster using a salt-resistant render. This render can be formed by using a mixture of sharp sand and cement gauged with diluted Dryzone Renderguard Gold. Renderguard Gold is BBA approved for use as a replastering additive as part of the Safeguard damp-proofing system. Consideration should also be given to the use of Dryzone Renovation Plasters.
Size
5 Litres
Material
Liquid
Colour
Gold
Time to Set
6 weeks
Usage
Render Additive
Coverage
1 litre of concentrate is sufficient for 7 m2 of render at 12 mm thickness
Stormdry MAX Enhanced Waterproofing Barrier is a clear gel coating providing lasting waterproofing, crack-bridging and anti-graffiti protection. It can be used on masonry, stone, concrete, selected metals and painted surfaces. It can be used as a top coat for Stormdry Masonry Protection Cream when multiple fine cracking is seen on the wall surface. Stormdry Max bridges cracks up to 0.6 mm wide providing protection against penetrating damp, giving up to 10 years weather protection. In anti-graffiti application, it will take up to 15 wash cycles to eliminate any graffiti applied to the surface coating and offers low-level flood resistance. The clear liquid is air moisture curing and is ready for use. It can be applied by brush and roller. The coating is partially breathable and gives a semi-gloss appearance which fades with time.
Stormdry Masonry Protection Cream is a deeply penetrating water-repellent silicone cream for the protection of masonry. The thick, white cream is ready to use and applied by brush, roller or airless spray. It penetrates into brickwork, masonry, mortar and concrete, where it will cure to a colourless, natural finish, lasting for over 25 years. Stormdry Cream can help improve the energy efficiency of dwellings by reducing heat loss.
Dryzone is a special damp proofing cream that is introduced along the mortar course at regular intervals by injecting it into pre-drilled holes. The Dryzone then diffuses before curing to form a continuous water repellent barrier. This prevents the damp from rising up the wall.
When a new damp-proof course has been installed it will normally be necessary to hack off salt contaminated plaster and to replaster using a salt-resistant render. This render can be formed by using a mixture of sharp sand and cement gauged with diluted Dryzone Renderguard Gold. Renderguard Gold is BBA approved for use as a replastering additive as part of the Safeguard damp-proofing system. Consideration should also be given to the use of Dryzone Renovation Plasters.
Stormdry MAX Enhanced Waterproofing Barrier is a clear gel coating providing lasting waterproofing, crack-bridging and anti-graffiti protection. It can be used on masonry, stone, concrete, selected metals and painted surfaces. It can be used as a top coat for Stormdry Masonry Protection Cream when multiple fine cracking is seen on the wall surface. Stormdry Max bridges cracks up to 0.6 mm wide providing protection against penetrating damp, giving up to 10 years weather protection. In anti-graffiti application, it will take up to 15 wash cycles to eliminate any graffiti applied to the surface coating and offers low-level flood resistance. The clear liquid is air moisture curing and is ready for use. It can be applied by brush and roller. The coating is partially breathable and gives a semi-gloss appearance which fades with time.