Free Click & Collect
Within One Hour
Delivery address
Collection branch
Ideas & Advice
VAT
EX
INC
Safeguard Stormdry Max Waterproofing 1L
Hover Over to Zoom In
Frequently bought together
Overview
- Long lasting clear silicone waterproof barrier
- Apply by medium-pile brush or paint roller
- Enhanced crack bridging up to 0.6 mm
- Long lifetime (10 years on masonry)
- Non-sacrificial anti-graffiti coating (up to 15 wash cycles)
- UV resistant finish for all-weather longevity
Technical specification
Size
1 Litre
Interior or Exterior Use
Exterior
Coverage per Litre
4 – 5 m2 per litre (for 1 coat)
Drying Time
4 hours
Time to Full Cure
28 days
VOC Level
Medium 8-24.1%
Colour
Clear
Type
Masonry Protection Cream
Manufacturer Model No
DM-STORMDRY MAX 1L
Brand Name
Stormdry
Data sheets
Reviews
Be the first to review this product.
Safeguard Dryrod Damp Proofing Rods Kit 6M BBA Approved
Kit contains: x1 Dryrod 50 Box x1 Dryzone System Hole Clearing Tool - x1 Dryzone System Rod Cutting Tool- x1 Dryzone Drill Bit - 12mm x 300mm - x1 Stormdry Xr Mortar - No fuss, no mess, no stress. Dryrod is the next generation of rising damp treatment developed by Safeguard Europe Ltd. The patented, BBA approved 12mm diameter DIY damp proofing rods carry a powerful water repellent material, which cures to form a powerful barrier to rising damp. Once they are inserted, the rods will start to dry out the wall by slowly diffusing water repellent deep into the damp masonry, curing to form a powerful barrier to further rising damp. Installation: Simply insert the 9" rods into a series of 12mm holes drilled into the lowest available continuous mortar course of the wall. No specialist pumps or mastic guns required. A normal hammer drill will suffice. Once installed they diffuse the active ingredient deep into the wall before it cures to form a water-repellent chemical damp course. Advantages over other methods: The most effective rising damp treatment available - Proven to work even up to 95% saturation Quick & easy to install DIY rising damp treatment - Simply drill holes & insert the damp-proofing rods to form a new chemical damp course. No mess to clean up - The active ingredient is contained within the rods so there's no chance of messy spillages that occur with other solutions for damp proofing for walls.
£148.32 each (Inc. VAT)
Safeguard Dryzone Mould Eliminator 5L
Dryzone Mould Eliminator is a bleach-based and hygienic surface cleaner designed to quickly remove mould and mildew from household surfaces. Ideal for use in bathrooms and kitchens, spray directly onto mould and mildew affected surfaces. Once applied, the powerful formula acts immediately and usually eliminates mould in less than three minutes before being washed away to reveal a clean and mould-free surface.
£43.66 each (Inc. VAT)
Safeguard Drybase Waterproof Plugging Compound 3kg
A cementitious, ready-mixed, rapid setting compound to stop water and moisture ingress. Drybase Waterproofing Plug can be used internally or externally as a waterproof plugging mortar or where rapid setting and early strength gain is required: Plugging water leaks and seepage. Sealing leaking cracks. Sealing wet surfaces. Plugging leaks in earthenware pipes. Caulking tunnel segment joints. Fixings in water structures where immediate use is required.
£25.91 each (Inc. VAT)
Safeguard Drybase TS-Plus Polymer Tanking Kit 12kg
A high-performance cementitious waterproofing system designed for basements, cellars, and other below-ground structures that can withstand up to 5-bar water pressure. Supplied as a two-part kit with pre-measured cementitious powder and liquid polymer components, it produces a dense, durable slurry tested to withstand up to 5 bar hydrostatic water pressure (equivalent to 50 metres below ground). The polymer additive improves workability, bond strength and flexibility, making the kit suitable for internal tanking in both new-build and retrofit settings. Once mixed, it can be applied to damp masonry and concrete walls and floors using a trowel or brush in two coats. Ideal for areas prone to movement or salt efflorescence. Compliant with BS 8102:2022 as a Type A barrier system.
£50.46 each (Inc. VAT)