Acrylic water based barn paint is ideally suited to the protection of exterior wooden, metal and plastic cladded buildings. It can be applied to previously painted surfaces even those coated with weathered bitumen, tar varnish or creosote. It is tough, durable and has excellent colour retention. It will flex with the substrate rather than flake or crack. Suitable for many applications including fencing, posts, guttering and weathered galvanising without the need for a primer.
Colour Family
Blacks
Colour
Black
Size
5 L
Application Method
Brush, Roller or Spray
Interior or Exterior Use
Exterior
Coverage per Litre
13-15 m2
Drying Time
Touch dry in 2 Hrs
Drying time between coats
4 hrs
Clean equipment with
Water
Suitable for
Wood, galvanised steel, plastic, concrete, brick and cladding
A top quality high opacity emulsion based on unique AkzoNobel technology which gives excellent coverage and application as well as a durable finish which lasts everyday living.
Colour Family
Greys
Finish
Matt
Size
5 L
Application Method
Brush, Roller or Spray
Coverage per Litre
Up to 17 m?
Drying Time
Dependent on temperature/humidity
Drying time between coats
2 - 4 hrs
Clean equipment with
After use, remove as much paint as possible from equipment before cleaning with water
BIOCHECK Fungicidal Paint is the third part of MGC's mould eradication treatment and was developed over 50 years ago to eradicate black mould problems in severe condensation situations and prevent their return. BIOCHECK Fungicidal Emulsions are now specified and successfully used by Local Authorities, Housing Associations, private landlords, universities, MOD and private householders throughout the country as a mould prevention paint. BIOCHECK Fungicidal Matt and Silk Emulsion has been tested by the Building Research Advisory Service and shown to be completely resistant to colonization and growth of mould and can be expected to perform well on surfaces prone to condensation.
An excellent, premium quality, low odour mould-resistant coating guaranteed to protect against unsightly and unhygienic black mould even when there is persistent condensation. The unsurpassed performance of Dryzone System Mould-Resistant Emulsion Paint is achieved by combining modern paint technology with advanced paint-film protection. It is fully washable and resistant to the effects of condensation when the coating is fully dried out.
Acrylic water based barn paint is ideally suited to the protection of exterior wooden, metal and plastic cladded buildings. It can be applied to previously painted surfaces even those coated with weathered bitumen, tar varnish or creosote. It is tough, durable and has excellent colour retention. It will flex with the substrate rather than flake or crack. Suitable for many applications including fencing, posts, guttering and weathered galvanising without the need for a primer.
A top quality high opacity emulsion based on unique AkzoNobel technology which gives excellent coverage and application as well as a durable finish which lasts everyday living.
BIOCHECK Fungicidal Paint is the third part of MGC's mould eradication treatment and was developed over 50 years ago to eradicate black mould problems in severe condensation situations and prevent their return. BIOCHECK Fungicidal Emulsions are now specified and successfully used by Local Authorities, Housing Associations, private landlords, universities, MOD and private householders throughout the country as a mould prevention paint. BIOCHECK Fungicidal Matt and Silk Emulsion has been tested by the Building Research Advisory Service and shown to be completely resistant to colonization and growth of mould and can be expected to perform well on surfaces prone to condensation.
An excellent, premium quality, low odour mould-resistant coating guaranteed to protect against unsightly and unhygienic black mould even when there is persistent condensation. The unsurpassed performance of Dryzone System Mould-Resistant Emulsion Paint is achieved by combining modern paint technology with advanced paint-film protection. It is fully washable and resistant to the effects of condensation when the coating is fully dried out.