Free Click & Collect
Within One Hour
Delivery address
Collection branch
Ideas & Advice
VAT
EX
INC
Hover Over to Zoom In
Frequently bought together
Overview
- High quality bonding compound
- Improves adhesion and flexibility
- Perfect for incorporating into mixes used for repairing floors, pre-cast slabs, spalled concrete and bedding tiles
Technical specification
Size
5 Litres
Interior or Exterior Use
Interior
Drying Time
N/A
VOC Level
Minimal 0-0.29%
Colour
White
Type
Styrene Butadiene Rubber
Manufacturer Model No
TK-SWBP/S
Brand Name
Drybase
Data sheets
Reviews
Be the first to review this product.
Safeguard Dryrod Damp Proofing Rods Kit 6M BBA Approved
Kit contains: x1 Dryrod 50 Box x1 Dryzone System Hole Clearing Tool - x1 Dryzone System Rod Cutting Tool- x1 Dryzone Drill Bit - 12mm x 300mm - x1 Stormdry Xr Mortar - No fuss, no mess, no stress. Dryrod is the next generation of rising damp treatment developed by Safeguard Europe Ltd. The patented, BBA approved 12mm diameter DIY damp proofing rods carry a powerful water repellent material, which cures to form a powerful barrier to rising damp. Once they are inserted, the rods will start to dry out the wall by slowly diffusing water repellent deep into the damp masonry, curing to form a powerful barrier to further rising damp. Installation: Simply insert the 9" rods into a series of 12mm holes drilled into the lowest available continuous mortar course of the wall. No specialist pumps or mastic guns required. A normal hammer drill will suffice. Once installed they diffuse the active ingredient deep into the wall before it cures to form a water-repellent chemical damp course. Advantages over other methods: The most effective rising damp treatment available - Proven to work even up to 95% saturation Quick & easy to install DIY rising damp treatment - Simply drill holes & insert the damp-proofing rods to form a new chemical damp course. No mess to clean up - The active ingredient is contained within the rods so there's no chance of messy spillages that occur with other solutions for damp proofing for walls.
£148.32 each (Inc. VAT)
Sovereign Mould Eradication Additive 50g
Sovereign FungiChek Mould Eradication Additive is added to emulsion paints to prevent black mould from growing on internal surfaces. It can also be added to wallpaper paste. For larger or very severe outbreaks, FungiChek ready mixed paints are available.
£15.35 each (Inc. VAT)
Safeguard Stormdry Max Waterproofing 1L
Stormdry MAX Enhanced Waterproofing Barrier is a clear gel coating providing lasting waterproofing, crack-bridging and anti-graffiti protection. It can be used on masonry, stone, concrete, selected metals and painted surfaces. It can be used as a top coat for Stormdry Masonry Protection Cream when multiple fine cracking is seen on the wall surface. Stormdry Max bridges cracks up to 0.6 mm wide providing protection against penetrating damp, giving up to 10 years weather protection. In anti-graffiti application, it will take up to 15 wash cycles to eliminate any graffiti applied to the surface coating and offers low-level flood resistance. The clear liquid is air moisture curing and is ready for use. It can be applied by brush and roller. The coating is partially breathable and gives a semi-gloss appearance which fades with time.
£46.76 each (Inc. VAT)
Sovereign Weatherchek FAÇADE Cream 5L
Sovereign WeatherChek Façade Cream is an easy-to-use water repellent for protecting external masonry from penetrating damp and freeze-thaw damage. The viscous emulsion of silane and siloxanes penetrates and impregnates porous masonry to produce a water-repellent surface. WeatherChek Façade Cream can be applied with a spray, brush or roller to porous masonry such as brick, mortar, render, limestone and sandstone. Reducing the porosity of masonry also results in reduced heat transfer, improving the thermal properties of a dwelling. WeatherChek Façade Cream also does not prevent a wall from breathing.
£171.90 each (Inc. VAT)