Free Click & Collect
Within One Hour
Delivery address
Collection branch
Ideas & Advice
VAT
EX
INC
Safeguard Dryzone Mould Remover Gel Kit 150ml
Hover Over to Zoom In
Overview
- All-purpose mould remover: Gets rid of all types of mould: black mould, green, brown, pink. Compatible with window frames, plastered walls, rubber/silicone seals and more
- No scrubbing needed - Simply squeeze on, wait then wipe away with a wet cloth. More versatile than mould remover spray. Mess-free. Leave overnight for best results
- Super-clingy formula: Suitable for vertical and horizontal surfaces. Sticks to hard-to-reach places like washing machine seals, air vents, bathroom/kitchen tiles
- Low odour: Comfortable and easy to use around the home. Large 150ml tube is enough for multiple uses
- For a clean and pleasant living space - Mould harms health and home. Protect your mental & physical health by removing visible mould, giving you time to repair the underlying cause
Technical specification
Size
150ml
Interior or Exterior Use
Interior
VOC Level
Minimal 0-0.29%
Colour
Clear
Type
Anti-Mould Gel
Manufacturer Model No
KT-A00088-001
Brand Name
Dryzone
Data sheets
Reviews
Be the first to review this product.
NEW
Drybase Tanking Slurry is a cementitious, ready-mixed surface waterproofer. The waterproofing function is achieved by a unique composition of cement, graded quartz sand and selected additives. It can be used against active and passive water pressures. The initial and final bonding capability of Drybase Tanking Slurry is excellent, making it suitable to be applied to horizontal as well as vertical surfaces. It is durable, resistant to frost and heat after setting, but also permeable to vapour. Drybase Tanking Slurry is tested for use in contact with drinking water.
£59.06 each (Inc. VAT)
NEW
Kit contains: x1 Dryrod 50 Box x1 Dryzone System Hole Clearing Tool - x1 Dryzone System Rod Cutting Tool- x1 Dryzone Drill Bit - 12mm x 300mm - x1 Stormdry Xr Mortar - No fuss, no mess, no stress. Dryrod is the next generation of rising damp treatment developed by Safeguard Europe Ltd. The patented, BBA approved 12mm diameter DIY damp proofing rods carry a powerful water repellent material, which cures to form a powerful barrier to rising damp. Once they are inserted, the rods will start to dry out the wall by slowly diffusing water repellent deep into the damp masonry, curing to form a powerful barrier to further rising damp. Installation: Simply insert the 9" rods into a series of 12mm holes drilled into the lowest available continuous mortar course of the wall. No specialist pumps or mastic guns required. A normal hammer drill will suffice. Once installed they diffuse the active ingredient deep into the wall before it cures to form a water-repellent chemical damp course. Advantages over other methods: The most effective rising damp treatment available - Proven to work even up to 95% saturation Quick & easy to install DIY rising damp treatment - Simply drill holes & insert the damp-proofing rods to form a new chemical damp course. No mess to clean up - The active ingredient is contained within the rods so there's no chance of messy spillages that occur with other solutions for damp proofing for walls.
£148.32 each (Inc. VAT)
Dryzone Targeted Treatment Damp ProCourse Cream - Box 10
Dryzone is a special damp proofing cream that is introduced along the mortar course at regular intervals by injecting it into pre-drilled holes. The Dryzone then diffuses before curing to form a continuous water repellent barrier. This prevents the damp from rising up the wall.
£221.76 per box (Inc. VAT)
NEW
Drybase Tanking Slurry is a cementitious, ready-mixed surface waterproofer. The waterproofing function is achieved by a unique composition of cement, graded quartz sand and selected additives. It can be used against active and passive water pressures. The initial and final bonding capability of Drybase Tanking Slurry is excellent, making it suitable to be applied to horizontal as well as vertical surfaces. It is durable, resistant to frost and heat after setting, but also permeable to vapour. Drybase Tanking Slurry is tested for use in contact with drinking water.
£30.73 each (Inc. VAT)