Free Click & Collect
Within One Hour
Delivery address
Collection branch
Ideas & Advice
VAT
EX
INC
Safeguard Drybase TS-Plus Tanking Slurry 20kg & 5-bar Waterproofer 4L
Hover Over to Zoom In
Frequently bought together
Overview
- For above and below ground waterproofing
- Tested for up to 7 bar water pressure resistance
- Excellent bonding capabilities, suitable for horizontal and vertical surfaces
- For above or below ground application
- Brush, trowel or spray application
- Efflorescence-free - cement, graded quartz sand and additives mix
Technical specification
Size
24kg
Interior or Exterior Use
Interior
Coverage per Litre
A 20kg bag of powder will cover 3.5 - 5 m2, applied in two coats at 1 - 2 mm thickness each.
Drying Time
2 - 4 hours
Time to Full Cure
7 - 14 days
VOC Level
Minimal 0-0.29%
Colour
Grey
Type
Tanking Slurry
Manufacturer Model No
KT-A00086-001
Brand Name
Drybase
Data sheets
Reviews
Be the first to review this product.
Safeguard Stormdry XR-Mortar 310ml
Stormdry XR-Mortar is a semi-flexible polymer modified crack filling mortar for masonry. It can be used to seal cracks in bricks and masonry joints to prevent rain penetration or to repoint damaged areas of pointing in both internal and external environments. It is applied directly to the damaged area using a cartridge gun and nozzle to provide a waterproof barrier. It can also be used to plug damp proof course holes.
£22.31 each (Inc. VAT)
Marshalls Weatherpoint 365 Buff 15kg
Marshalls Weatherpoint 365 is an all weather jointing material that will assist in speeding up installation time and reduce labour involvement. No mixing or waste involved, Weatherpoint sets like concrete. It can be stored under water and it stays workable indefinitely. Once fully cured, Weatherpoint has a comparable strength to 4:1 mortar.
£66.40 each (Inc. VAT)
Sovereign Mould Eradication Additive 50g
Sovereign FungiChek Mould Eradication Additive is added to emulsion paints to prevent black mould from growing on internal surfaces. It can also be added to wallpaper paste. For larger or very severe outbreaks, FungiChek ready mixed paints are available.
£16.43 each (Inc. VAT)
Setcrete Acrylic Primer 2.5L
Setcrete Acrylic Primer prevents unacceptably rapid drying of Setcrete Floor Levelling Compounds over absorbent subfloors and promotes adhesion to non-absorbent surfaces. It is suitable for use over normal underfloor heating installations and is coloured green to provide the user with visual control of coverage uniformity.
Setcrete Acrylic Primer should be used on absorbent surfaces such as concrete, sand/cement screeds, plywood and hardboard. It should also be used on non-absorbent surfaces of terrazzo, power floated concrete, quarry and ceramic tiles, sound asphalt, well bonded epoxy and polyurethane coatings and minimal existing adhesive residue.
£26.33 each (Inc. VAT)