Free Click & Collect
Within One Hour
Delivery address
Collection branch
Ideas & Advice
VAT
EX
INC
Safeguard Dryzone System High Viscosity Applicator Gun
Hover Over to Zoom In
Overview
- Multipurpose Dryzone applicator gun
- High quality, Tough construction
- Made of aluminum alloy
- Easy to use and convenient to operate
Technical specification
Size
1
Interior or Exterior Use
Interior
VOC Level
Minimal 0-0.29%
Colour
Grey
Type
DPC Gun
Manufacturer Model No
AM-HV APPLICATOR WITH NOZZLE
Brand Name
Dryzone
Reviews
Be the first to review this product.
Sika Frosterproofer 1L
Sika MaxMix Frostproofer & Accelerator is a liquid admixture for mortars and concrete. It can be used in all situations where reduced setting time is required. For working at temperatures down to -2 degrees. 1 litre treats up to 100kg of cement.
£18.00 each (Inc. VAT)
Wykamol Microtech Biocide 1 Litre
Biocide is a substance or product that controls or destroys harmful or unwanted organisms, such as bacteria, viruses, fungi, insects, or rodents, through a chemical or biological action, rather than physical means.
£34.13 each (Inc. VAT)
Sika Maxmix Cement Colour Red 1L
Sika MaxMix Colour is a concentrated solution of pigments, suitable for brick laying, paving, renders, grouts and screeds. 1 litre treats up to 400kg of mortar.
£18.72 each (Inc. VAT)
Safeguard Dryrod Damp Proofing Rods Kit 6M BBA Approved
Kit contains: x1 Dryrod 50 Box x1 Dryzone System Hole Clearing Tool - x1 Dryzone System Rod Cutting Tool- x1 Dryzone Drill Bit - 12mm x 300mm - x1 Stormdry Xr Mortar - No fuss, no mess, no stress. Dryrod is the next generation of rising damp treatment developed by Safeguard Europe Ltd. The patented, BBA approved 12mm diameter DIY damp proofing rods carry a powerful water repellent material, which cures to form a powerful barrier to rising damp. Once they are inserted, the rods will start to dry out the wall by slowly diffusing water repellent deep into the damp masonry, curing to form a powerful barrier to further rising damp. Installation: Simply insert the 9" rods into a series of 12mm holes drilled into the lowest available continuous mortar course of the wall. No specialist pumps or mastic guns required. A normal hammer drill will suffice. Once installed they diffuse the active ingredient deep into the wall before it cures to form a water-repellent chemical damp course. Advantages over other methods: The most effective rising damp treatment available - Proven to work even up to 95% saturation Quick & easy to install DIY rising damp treatment - Simply drill holes & insert the damp-proofing rods to form a new chemical damp course. No mess to clean up - The active ingredient is contained within the rods so there's no chance of messy spillages that occur with other solutions for damp proofing for walls.
£148.32 each (Inc. VAT)