Delivery address
Collection branch

Safeguard Stormdry Max Waterproofing 3L

506086
Safeguard Stormdry Max Waterproofing 3L
Safeguard Stormdry Max Waterproofing 3L
Hover Over to Zoom In
Safeguard Stormdry Max Waterproofing 3L
Safeguard Stormdry Max Waterproofing 3L
Safeguard Stormdry Max Waterproofing 3L

Overview

  • Long lasting clear silicone waterproof barrier
  • Apply by medium-pile brush or paint roller
  • Enhanced crack bridging up to 0.6 mm
  • Long lifetime (10 years on masonry)
  • Non-sacrificial anti-graffiti coating (up to 15 wash cycles)
  • UV resistant finish for all-weather longevity

Technical specification

Size
3 Litres
Interior or Exterior Use
Exterior
Coverage per Litre
4 – 5 m2 per litre (for 1 coat)
Drying Time
4 hours
Time to Full Cure
28 days
VOC Level
Medium 8-24.1%
Colour
Clear
Type
Masonry Protection Cream
Manufacturer Model No
DM-STORMDRY MAX 3L
Brand Name
Stormdry

Reviews

Be the first to review this product.
Retail price

£195.46

each
£162.88 ex. vat
UNLOCK TRADE PRICE
Access Trade Price
Enter postcode for local availability
Select collection branch for local availability
Please enter your delivery postcode...
Please select your collection branch...

Related products

Kit contains: x1 Dryrod 50 Box x1 Dryzone System Hole Clearing Tool - x1 Dryzone System Rod Cutting Tool- x1 Dryzone Drill Bit - 12mm x 300mm - x1 Stormdry Xr Mortar - No fuss, no mess, no stress. Dryrod is the next generation of rising damp treatment developed by Safeguard Europe Ltd. The patented, BBA approved 12mm diameter DIY damp proofing rods carry a powerful water repellent material, which cures to form a powerful barrier to rising damp. Once they are inserted, the rods will start to dry out the wall by slowly diffusing water repellent deep into the damp masonry, curing to form a powerful barrier to further rising damp. Installation: Simply insert the 9" rods into a series of 12mm holes drilled into the lowest available continuous mortar course of the wall. No specialist pumps or mastic guns required. A normal hammer drill will suffice. Once installed they diffuse the active ingredient deep into the wall before it cures to form a water-repellent chemical damp course. Advantages over other methods: The most effective rising damp treatment available - Proven to work even up to 95% saturation Quick & easy to install DIY rising damp treatment - Simply drill holes & insert the damp-proofing rods to form a new chemical damp course. No mess to clean up - The active ingredient is contained within the rods so there's no chance of messy spillages that occur with other solutions for damp proofing for walls.
Size
6m
Interior or Exterior Use
Interior
Coverage per Litre
10 m on 9" wall = 84 Rods
Drying Time
N/A
Time to Full Cure
1 month
VOC Level
Minimal 0-0.29%
Colour
White
Type
Damp-Proof Rods
Manufacturer Model No
AM-DRYROD KIT 6M
Brand Name
Safeguard

£148.32

each (Inc. VAT)
Loading...
Loading...
Drybase Tanking Slurry is a cementitious, ready-mixed surface waterproofer. The waterproofing function is achieved by a unique composition of cement, graded quartz sand and selected additives. It can be used against active and passive water pressures. The initial and final bonding capability of Drybase Tanking Slurry is excellent, making it suitable to be applied to horizontal as well as vertical surfaces. It is durable, resistant to frost and heat after setting, but also permeable to vapour. Drybase Tanking Slurry is tested for use in contact with drinking water.
Size
20kg
Interior or Exterior Use
Interior
Coverage per Litre
A 20kg bag of powder will cover 3.5 - 5 m2, applied in two coats at 1 - 2 mm thickness each.
Drying Time
2 - 4 hours
Time to Full Cure
7 - 14 days
VOC Level
Minimal 0-0.29%
Colour
Grey
Type
Tanking Slurry
Manufacturer Model No
FG-A00324-001
Brand Name
Safeguard

£30.73

each (Inc. VAT)
Loading...
Loading...
Dryzone Anti-Mould Additive is a highly-effective biocidal additive liquid. It imparts paints, wallpaper pastes and tile grouts with mould-resistant properties. The special biocidal formula of the additive will resist the growth of mould in areas of persistent condensation for up to five years.
Size
100ml
Interior or Exterior Use
Interior
Coverage per Litre
Depends on paint selected
Drying Time
Depends on paint selected
Time to Full Cure
Depends on paint selected
VOC Level
Low 0.3-7.1%
Colour
Yellow
Type
Anti-Mould Additive
Manufacturer Model No
DM-DRYZONE AM ADDITIVE
Brand Name
Safeguard

£9.08

each (Inc. VAT)
Loading...
Loading...
Mould growth on silicone sealant has 2 major causes: poor quality sealant or standing water atop a poorly applied joint. Start again and do the job right! The Dryzone Silicone Sealant Replacement Kit contains everything needed to give humid bathrooms and kitchens a fresh new look with premium sanitary-grade silicone joints. 12-item kit with absolutely everything needed to successfully carry out sealant removal and replacement Profile all joint sizes and corner angles with versatile multi-head profiling tool Disinfect area with included alcohol wipes Remove and apply simply and cleanly with included brush, applicator gun and masking tape Silicone Sealant tested to EN 15651-3 for use in sanitary areas.
Size
310ml
Interior or Exterior Use
Interior
Coverage per Litre
One bath, two showers and two sinks
Drying Time
> 24 hours
Time to Full Cure
> 24 hours
VOC Level
Minimal 0-0.29%
Colour
White
Type
Silicone Sealant Kit
Manufacturer Model No
DM-SILICONE SEALANT KIT
Brand Name
Safeguard

£79.63

each (Inc. VAT)
Loading...
Loading...
Safeguard Dryrod Damp Proofing Rods Kit 6M BBA Approved
Safeguard Dryrod Damp Proofing Rods Kit 6M BBA Approved
Kit contains: x1 Dryrod 50 Box x1 Dryzone System Hole Clearing Tool - x1 Dryzone System Rod Cutting Tool- x1 Dryzone Drill Bit - 12mm x 300mm - x1 Stormdry Xr Mortar - No fuss, no mess, no stress. Dryrod is the next generation of rising damp treatment developed by Safeguard Europe Ltd. The patented, BBA approved 12mm diameter DIY damp proofing rods carry a powerful water repellent material, which cures to form a powerful barrier to rising damp. Once they are inserted, the rods will start to dry out the wall by slowly diffusing water repellent deep into the damp masonry, curing to form a powerful barrier to further rising damp. Installation: Simply insert the 9" rods into a series of 12mm holes drilled into the lowest available continuous mortar course of the wall. No specialist pumps or mastic guns required. A normal hammer drill will suffice. Once installed they diffuse the active ingredient deep into the wall before it cures to form a water-repellent chemical damp course. Advantages over other methods: The most effective rising damp treatment available - Proven to work even up to 95% saturation Quick & easy to install DIY rising damp treatment - Simply drill holes & insert the damp-proofing rods to form a new chemical damp course. No mess to clean up - The active ingredient is contained within the rods so there's no chance of messy spillages that occur with other solutions for damp proofing for walls.
£148.32 each (Inc. VAT)
Safeguard Drybase TS-Plus Tanking Slurry 20kg
Safeguard Drybase TS-Plus Tanking Slurry 20kg
Drybase Tanking Slurry is a cementitious, ready-mixed surface waterproofer. The waterproofing function is achieved by a unique composition of cement, graded quartz sand and selected additives. It can be used against active and passive water pressures. The initial and final bonding capability of Drybase Tanking Slurry is excellent, making it suitable to be applied to horizontal as well as vertical surfaces. It is durable, resistant to frost and heat after setting, but also permeable to vapour. Drybase Tanking Slurry is tested for use in contact with drinking water.
£30.73 each (Inc. VAT)
Safeguard Dryzone Anti-mould Paint Additive 100ml
Safeguard Dryzone Anti-mould Paint Additive 100ml
Dryzone Anti-Mould Additive is a highly-effective biocidal additive liquid. It imparts paints, wallpaper pastes and tile grouts with mould-resistant properties. The special biocidal formula of the additive will resist the growth of mould in areas of persistent condensation for up to five years.
£9.08 each (Inc. VAT)
Safeguard Dryzone Silicone Sealant Replacement Kit
Safeguard Dryzone Silicone Sealant Replacement Kit
Mould growth on silicone sealant has 2 major causes: poor quality sealant or standing water atop a poorly applied joint. Start again and do the job right! The Dryzone Silicone Sealant Replacement Kit contains everything needed to give humid bathrooms and kitchens a fresh new look with premium sanitary-grade silicone joints. 12-item kit with absolutely everything needed to successfully carry out sealant removal and replacement Profile all joint sizes and corner angles with versatile multi-head profiling tool Disinfect area with included alcohol wipes Remove and apply simply and cleanly with included brush, applicator gun and masking tape Silicone Sealant tested to EN 15651-3 for use in sanitary areas.
£79.63 each (Inc. VAT)