Free Click & Collect
Within One Hour
Delivery address
Collection branch
Ideas & Advice
VAT
EX
INC
Safeguard Stormdry Repointing Additive No.2 500ML
Hover Over to Zoom In
Overview
- Additive No.2 enhances waterproofing and bonding
- 500ml concentrate to be diluted
- Compatible with Stormdry Cream
- Add to sand:cement/sand:lime mortar
- British Board of Agrement (BBA) Approved
Technical specification
Size
500ml
Interior or Exterior Use
Exterior
Coverage per Litre
One 500ml container will provide sufficient mortar to repoint approximately 5 m2 of masonry.
VOC Level
Minimal 0-0.29%
Colour
White
Type
Repointing Additive
Brand Name
Stormdry
Manufacturer Model No
DM-SDREPOINTING2
Data sheets
Reviews
Be the first to review this product.
Sika Frosterproofer 1L
Sika MaxMix Frostproofer & Accelerator is a liquid admixture for mortars and concrete. It can be used in all situations where reduced setting time is required. For working at temperatures down to -2 degrees. 1 litre treats up to 100kg of cement.
£18.90 each (Inc. VAT)
Sika 2 Waterplug Leak Sealing Admixture 5L
Sika®-2 Water Plug is a ready to use very rapid setting leak stopping liquid which is mixed with ordinary portland cement to produce a paste for immediate leak sealing against high water pressure infiltration.
£72.58 each (Inc. VAT)
Dryzone Targeted Treatment Damp ProCourse Cream - Box 10
Dryzone is a special damp proofing cream that is introduced along the mortar course at regular intervals by injecting it into pre-drilled holes. The Dryzone then diffuses before curing to form a continuous water repellent barrier. This prevents the damp from rising up the wall.
£221.76 per box (Inc. VAT)
Setcrete Acrylic Primer 2.5L
Setcrete Acrylic Primer prevents unacceptably rapid drying of Setcrete Floor Levelling Compounds over absorbent subfloors and promotes adhesion to non-absorbent surfaces. It is suitable for use over normal underfloor heating installations and is coloured green to provide the user with visual control of coverage uniformity.
Setcrete Acrylic Primer should be used on absorbent surfaces such as concrete, sand/cement screeds, plywood and hardboard. It should also be used on non-absorbent surfaces of terrazzo, power floated concrete, quarry and ceramic tiles, sound asphalt, well bonded epoxy and polyurethane coatings and minimal existing adhesive residue.
£26.33 each (Inc. VAT)