Free Click & Collect
Within One Hour
Delivery address
Collection branch
Ideas & Advice
VAT
EX
INC
Hover Over to Zoom In
Overview
- For interior and exterior use
- Easy to use and apply
- Low odour compared to bitumen coatings
- Just add water
- Good adhesion
- Brush, trowel or spray applied
- Excellent workability
- Protects against water penetration
Technical specification
Size
25 kg
Colour
Grey
Type
Waterproofer
Manufacturer Model No
1262825
Brand Name
Sika
Reviews
Be the first to review this product.
Safeguard Drybase Tanking Slurry Bba 25 Kg
Drybase Tanking Slurry is a cementitious, ready-mixed surface waterproofer. The waterproofing function is achieved by a unique composition of cement, graded quartz sand and selected additives. It can be used against active and passive water pressures. The initial and final bonding capability of Drybase Tanking Slurry is excellent, making it suitable to be applied to horizontal as well as vertical surfaces. It is durable, resistant to frost and heat after setting, but also permeable to vapour. Drybase Tanking Slurry is tested for use in contact with drinking water.
£59.06 each (Inc. VAT)
Safeguard Dryrod Damp Proofing Rods Kit 6M BBA Approved
Kit contains: x1 Dryrod 50 Box x1 Dryzone System Hole Clearing Tool - x1 Dryzone System Rod Cutting Tool- x1 Dryzone Drill Bit - 12mm x 300mm - x1 Stormdry Xr Mortar - No fuss, no mess, no stress. Dryrod is the next generation of rising damp treatment developed by Safeguard Europe Ltd. The patented, BBA approved 12mm diameter DIY damp proofing rods carry a powerful water repellent material, which cures to form a powerful barrier to rising damp. Once they are inserted, the rods will start to dry out the wall by slowly diffusing water repellent deep into the damp masonry, curing to form a powerful barrier to further rising damp. Installation: Simply insert the 9" rods into a series of 12mm holes drilled into the lowest available continuous mortar course of the wall. No specialist pumps or mastic guns required. A normal hammer drill will suffice. Once installed they diffuse the active ingredient deep into the wall before it cures to form a water-repellent chemical damp course. Advantages over other methods: The most effective rising damp treatment available - Proven to work even up to 95% saturation Quick & easy to install DIY rising damp treatment - Simply drill holes & insert the damp-proofing rods to form a new chemical damp course. No mess to clean up - The active ingredient is contained within the rods so there's no chance of messy spillages that occur with other solutions for damp proofing for walls.
£148.32 each (Inc. VAT)
Marshalls Vitrified Jointing Compound Stone Grey 20kg
Marshalls SYMPHONY® Jointing Compound has been developed specifically for use with the Marshalls porcelain paving ranges. Available in two colours to compliment all products in the range, this fine textured jointing compound offers a smooth, more aesthetically pleasing finish to your project.
£135.73 per bag (Inc. VAT)
Denso Tape Synthetic Fibre 50mm x 10m
The original Denso pipe repair tape for protection below ground or underwater against corrosion on pipework, metal surfaces and cables and temporary sealing of fractured mains and cable joints.
£15.38 each (Inc. VAT)