Kit contains: x1 Dryrod 50 Box x1 Dryzone System Hole Clearing Tool - x1 Dryzone System Rod Cutting Tool- x1 Dryzone Drill Bit - 12mm x 300mm - x1 Stormdry Xr Mortar - No fuss, no mess, no stress. Dryrod is the next generation of rising damp treatment developed by Safeguard Europe Ltd. The patented, BBA approved 12mm diameter DIY damp proofing rods carry a powerful water repellent material, which cures to form a powerful barrier to rising damp. Once they are inserted, the rods will start to dry out the wall by slowly diffusing water repellent deep into the damp masonry, curing to form a powerful barrier to further rising damp. Installation: Simply insert the 9" rods into a series of 12mm holes drilled into the lowest available continuous mortar course of the wall. No specialist pumps or mastic guns required. A normal hammer drill will suffice. Once installed they diffuse the active ingredient deep into the wall before it cures to form a water-repellent chemical damp course. Advantages over other methods: The most effective rising damp treatment available - Proven to work even up to 95% saturation Quick & easy to install DIY rising damp treatment - Simply drill holes & insert the damp-proofing rods to form a new chemical damp course. No mess to clean up - The active ingredient is contained within the rods so there's no chance of messy spillages that occur with other solutions for damp proofing for walls.
Dryzone is a special damp proofing cream that is introduced along the mortar course at regular intervals by injecting it into pre-drilled holes. The Dryzone then diffuses before curing to form a continuous water repellent barrier. This prevents the damp from rising up the wall.
Sovereign WeatherChek Façade Cream is an easy-to-use water repellent for protecting external masonry from penetrating damp and freeze-thaw damage. The viscous emulsion of silane and siloxanes penetrates and impregnates porous masonry to produce a water-repellent surface. WeatherChek Façade Cream can be applied with a spray, brush or roller to porous masonry such as brick, mortar, render, limestone and sandstone. Reducing the porosity of masonry also results in reduced heat transfer, improving the thermal properties of a dwelling. WeatherChek Façade Cream also does not prevent a wall from breathing.
Everything you need to effectively eliminate black mould, clean staining and sanitise treated areas for long-lasting protection. Designed for domestic use in high-humidity areas like bathrooms, kitchens and utility rooms, the kit includes three powerful products for a complete three-stage process. Dryzone Mould Eliminator delivers fast-acting mould removal with visible results in minutes. Dryzone Mould Remover Gel targets stubborn surface stains in hard-to-reach places like silicone, behind fittings and around seals with a thick formula that clings in place for deep action. Apply Dryzone 100 Mould Sanitiser to neutralise invisible spores and bacteria, helping prevent recurrence and leaving the surface hygienically clean. This easy-to-use kit is suitable for use on tiles, painted walls, sealants, uPVC and most non-porous building surfaces.
Kit contains: x1 Dryrod 50 Box x1 Dryzone System Hole Clearing Tool - x1 Dryzone System Rod Cutting Tool- x1 Dryzone Drill Bit - 12mm x 300mm - x1 Stormdry Xr Mortar - No fuss, no mess, no stress. Dryrod is the next generation of rising damp treatment developed by Safeguard Europe Ltd. The patented, BBA approved 12mm diameter DIY damp proofing rods carry a powerful water repellent material, which cures to form a powerful barrier to rising damp. Once they are inserted, the rods will start to dry out the wall by slowly diffusing water repellent deep into the damp masonry, curing to form a powerful barrier to further rising damp. Installation: Simply insert the 9" rods into a series of 12mm holes drilled into the lowest available continuous mortar course of the wall. No specialist pumps or mastic guns required. A normal hammer drill will suffice. Once installed they diffuse the active ingredient deep into the wall before it cures to form a water-repellent chemical damp course. Advantages over other methods: The most effective rising damp treatment available - Proven to work even up to 95% saturation Quick & easy to install DIY rising damp treatment - Simply drill holes & insert the damp-proofing rods to form a new chemical damp course. No mess to clean up - The active ingredient is contained within the rods so there's no chance of messy spillages that occur with other solutions for damp proofing for walls.
Dryzone is a special damp proofing cream that is introduced along the mortar course at regular intervals by injecting it into pre-drilled holes. The Dryzone then diffuses before curing to form a continuous water repellent barrier. This prevents the damp from rising up the wall.
Sovereign WeatherChek Façade Cream is an easy-to-use water repellent for protecting external masonry from penetrating damp and freeze-thaw damage. The viscous emulsion of silane and siloxanes penetrates and impregnates porous masonry to produce a water-repellent surface. WeatherChek Façade Cream can be applied with a spray, brush or roller to porous masonry such as brick, mortar, render, limestone and sandstone. Reducing the porosity of masonry also results in reduced heat transfer, improving the thermal properties of a dwelling. WeatherChek Façade Cream also does not prevent a wall from breathing.
Everything you need to effectively eliminate black mould, clean staining and sanitise treated areas for long-lasting protection. Designed for domestic use in high-humidity areas like bathrooms, kitchens and utility rooms, the kit includes three powerful products for a complete three-stage process. Dryzone Mould Eliminator delivers fast-acting mould removal with visible results in minutes. Dryzone Mould Remover Gel targets stubborn surface stains in hard-to-reach places like silicone, behind fittings and around seals with a thick formula that clings in place for deep action. Apply Dryzone 100 Mould Sanitiser to neutralise invisible spores and bacteria, helping prevent recurrence and leaving the surface hygienically clean. This easy-to-use kit is suitable for use on tiles, painted walls, sealants, uPVC and most non-porous building surfaces.