The NDC Polipak DPC 150mm x 30m Damp Proof Course is produced from 100% recycled polythene and meets the standards outlined in BS 6515 (1984). Additionally, it is CE marked by EN14909 (2012). This product is appropriate for application in brick, stone, and concrete walls. The Damplas DPC is designed to provide a robust damp proof barrier that effectively prevents moisture ingress within structural walls.
H+HÕs Celcon Blocks High Strength Grade (7.3N/mm2 à identified with a black stripe on the block) is ideal where higher compressive strengths are required such as in the foundations and lower storeys of three storey buildings, piers under high vertical loads and in multi-storey buildings.
Visqueen HP Tanking Primer is a black elastomeric bituminous priming solution designed to prepared surfaces prior to the application of Visqueen Self Adhesive Membrane and Torch on Membranes
Available in Standard Grade (3.6N/mm2) and High Strength Grade (7.3N/mm2). Foundation Blocks can be used to support 3 storey constructions. They are suitable for the support of solid or cavity walls, framed construction or suspended floors, including beam and block.
The NDC Polipak DPC 150mm x 30m Damp Proof Course is produced from 100% recycled polythene and meets the standards outlined in BS 6515 (1984). Additionally, it is CE marked by EN14909 (2012). This product is appropriate for application in brick, stone, and concrete walls. The Damplas DPC is designed to provide a robust damp proof barrier that effectively prevents moisture ingress within structural walls.
H+HÕs Celcon Blocks High Strength Grade (7.3N/mm2 à identified with a black stripe on the block) is ideal where higher compressive strengths are required such as in the foundations and lower storeys of three storey buildings, piers under high vertical loads and in multi-storey buildings.
Visqueen HP Tanking Primer is a black elastomeric bituminous priming solution designed to prepared surfaces prior to the application of Visqueen Self Adhesive Membrane and Torch on Membranes
Available in Standard Grade (3.6N/mm2) and High Strength Grade (7.3N/mm2). Foundation Blocks can be used to support 3 storey constructions. They are suitable for the support of solid or cavity walls, framed construction or suspended floors, including beam and block.