Dryzone is a special damp proofing cream that is introduced along the mortar course at regular intervals by injecting it into pre-drilled holes. The Dryzone then diffuses before curing to form a continuous water repellent barrier. This prevents the damp from rising up the wall.
Drybase Tanking Slurry is a cementitious, ready-mixed surface waterproofer. The waterproofing function is achieved by a unique composition of cement, graded quartz sand and selected additives. It can be used against active and passive water pressures. The initial and final bonding capability of Drybase Tanking Slurry is excellent, making it suitable to be applied to horizontal as well as vertical surfaces. It is durable, resistant to frost and heat after setting, but also permeable to vapour. Drybase Tanking Slurry is tested for use in contact with drinking water.
Size
20kg
Interior or Exterior Use
Interior
Coverage per Litre
A 20kg bag of powder will cover 3.5 - 5 m2, applied in two coats at 1 - 2 mm thickness each.
A cementitious, ready-mixed, rapid setting compound to stop water and moisture ingress. Drybase Waterproofing Plug can be used internally or externally as a waterproof plugging mortar or where rapid setting and early strength gain is required: Plugging water leaks and seepage. Sealing leaking cracks. Sealing wet surfaces. Plugging leaks in earthenware pipes. Caulking tunnel segment joints. Fixings in water structures where immediate use is required.
Manufactured for us by a world leading gelcoat and flocoat manufacturer. When used with our resins and glass reinforcing achieves FAA fire rating. No extra coverings are required to achieve FAA. Available in mid grey Ral 7046, dark grey RAL 7011 or clear. We can supply in any colour upon request from the BS colour range or the European RAL colour range. Guaranteed for 20 or 25 years depending on resin choice. Available in 20kg, 10kg and 5kg tins.
Dryzone is a special damp proofing cream that is introduced along the mortar course at regular intervals by injecting it into pre-drilled holes. The Dryzone then diffuses before curing to form a continuous water repellent barrier. This prevents the damp from rising up the wall.
Drybase Tanking Slurry is a cementitious, ready-mixed surface waterproofer. The waterproofing function is achieved by a unique composition of cement, graded quartz sand and selected additives. It can be used against active and passive water pressures. The initial and final bonding capability of Drybase Tanking Slurry is excellent, making it suitable to be applied to horizontal as well as vertical surfaces. It is durable, resistant to frost and heat after setting, but also permeable to vapour. Drybase Tanking Slurry is tested for use in contact with drinking water.
A cementitious, ready-mixed, rapid setting compound to stop water and moisture ingress. Drybase Waterproofing Plug can be used internally or externally as a waterproof plugging mortar or where rapid setting and early strength gain is required: Plugging water leaks and seepage. Sealing leaking cracks. Sealing wet surfaces. Plugging leaks in earthenware pipes. Caulking tunnel segment joints. Fixings in water structures where immediate use is required.
Manufactured for us by a world leading gelcoat and flocoat manufacturer. When used with our resins and glass reinforcing achieves FAA fire rating. No extra coverings are required to achieve FAA. Available in mid grey Ral 7046, dark grey RAL 7011 or clear. We can supply in any colour upon request from the BS colour range or the European RAL colour range. Guaranteed for 20 or 25 years depending on resin choice. Available in 20kg, 10kg and 5kg tins.