Visqueen Building Products ECO TPS range is a blown film of extruded low-density polyethylene. Visqueen ECO TPS range is a high quality Temporary Protective Sheeting (TPS) manufactured from 100% Recycled LDPE.
Drybase Liquid-Applied DPM is a single-pack barrier coating for above ground use. It is supplied ready to use. It is available in black or white with a consistency similar to that of thick emulsion paint. The product is applied in two coats. Drybase Liquid-Applied DPM Is suitable for use on solid floors, embedded timbers and walls. Once applied, the product cures to form a membrane that is flexible and elastic. Drybase Liquid-Applied DPM is water- based and can be applied to damp substrates by brush, roller, or spray. The applied product is typically touch-dry in one hour.
Size
1 Litre
Interior or Exterior Use
Interior
Coverage per Litre
4.5 m2 per 5 litres for vapour barrier, 7 – 9 m2 per 5 litres for general DPM
Fleece backed 100 mm waterproof butyl tape gives a well-bonded seal to the mesh face of Drybase. Plaster Membrane. The fleece backing to this tape also accepts a plaster coat finish as well as plaster adhesive where a dot and dab plasterboard system is preferred.
Visqueen Low Permeability Gas Membrane offers a safe solution for the protection of buildings against radon, carbon dioxide and low levels of methane gas when installed in accordance with the relevant codes of practice
Visqueen Building Products ECO TPS range is a blown film of extruded low-density polyethylene. Visqueen ECO TPS range is a high quality Temporary Protective Sheeting (TPS) manufactured from 100% Recycled LDPE.
Drybase Liquid-Applied DPM is a single-pack barrier coating for above ground use. It is supplied ready to use. It is available in black or white with a consistency similar to that of thick emulsion paint. The product is applied in two coats. Drybase Liquid-Applied DPM Is suitable for use on solid floors, embedded timbers and walls. Once applied, the product cures to form a membrane that is flexible and elastic. Drybase Liquid-Applied DPM is water- based and can be applied to damp substrates by brush, roller, or spray. The applied product is typically touch-dry in one hour.
Fleece backed 100 mm waterproof butyl tape gives a well-bonded seal to the mesh face of Drybase. Plaster Membrane. The fleece backing to this tape also accepts a plaster coat finish as well as plaster adhesive where a dot and dab plasterboard system is preferred.
Visqueen Low Permeability Gas Membrane offers a safe solution for the protection of buildings against radon, carbon dioxide and low levels of methane gas when installed in accordance with the relevant codes of practice