Cleaning Chemicals

Safeguard Dryrod Damp Proofing Rods Kit 6M BBA Approved

383255

Kit contains: x1 Dryrod 50 Box x1 Dryzone System Hole Clearing Tool - x1 Dryzone System Rod Cutting Tool- x1 Dryzone Drill Bit - 12mm x 300mm - x1 Stormdry Xr Mortar - No fuss, no mess, no stress. Dryrod is the next generation of rising damp treatment developed by Safeguard Europe Ltd. The patented, BBA approved 12mm diameter DIY damp proofing rods carry a powerful water repellent material, which cures to form a powerful barrier to rising damp. Once they are inserted, the rods will start to dry out the wall by slowly diffusing water repellent deep into the damp masonry, curing to form a powerful barrier to further rising damp. Installation: Simply insert the 9" rods into a series of 12mm holes drilled into the lowest available continuous mortar course of the wall. No specialist pumps or mastic guns required. A normal hammer drill will suffice. Once installed they diffuse the active ingredient deep into the wall before it cures to form a water-repellent chemical damp course. Advantages over other methods: The most effective rising damp treatment available - Proven to work even up to 95% saturation Quick & easy to install DIY rising damp treatment - Simply drill holes & insert the damp-proofing rods to form a new chemical damp course. No mess to clean up - The active ingredient is contained within the rods so there's no chance of messy spillages that occur with other solutions for damp proofing for walls.

Size

Interior or Exterior Use

Interior

Coverage per Litre

10 m on 9" wall = 84 Rods

Drying Time

N/A

Time to Full Cure

1 month

VOC Level

Minimal 0-0.29%

Colour

White

Type

Damp-Proof Rods

Manufacturer Model No

AM-DRYROD KIT 6M

Brand Name

Dryzone

£148.32

each (Inc. VAT)

View full details

Marshalls Vitrified Jointing Compound Stone Grey 20kg

166107

Marshalls SYMPHONY® Jointing Compound has been developed specifically for use with the Marshalls porcelain paving ranges. Available in two colours to compliment all products in the range, this fine textured jointing compound offers a smooth, more aesthetically pleasing finish to your project.

Size

20 kg

Colour

Grey

Suitable for

External Use

Type

Jointing Compound

Brand Name

Marshalls

£146.52

per bag (Inc. VAT)

View full details

Safeguard Stormdry Max Waterproofing 1L

383270

Stormdry MAX Enhanced Waterproofing Barrier is a clear gel coating providing lasting waterproofing, crack-bridging and anti-graffiti protection. It can be used on masonry, stone, concrete, selected metals and painted surfaces. It can be used as a top coat for Stormdry Masonry Protection Cream when multiple fine cracking is seen on the wall surface. Stormdry Max bridges cracks up to 0.6 mm wide providing protection against penetrating damp, giving up to 10 years weather protection. In anti-graffiti application, it will take up to 15 wash cycles to eliminate any graffiti applied to the surface coating and offers low-level flood resistance. The clear liquid is air moisture curing and is ready for use. It can be applied by brush and roller. The coating is partially breathable and gives a semi-gloss appearance which fades with time.

Size

1 Litre

Interior or Exterior Use

Exterior

Coverage per Litre

4 – 5 m2 per litre (for 1 coat)

Drying Time

4 hours

Time to Full Cure

28 days

VOC Level

Medium 8-24.1%

Colour

Clear

Type

Masonry Protection Cream

Manufacturer Model No

DM-STORMDRY MAX 1L

Brand Name

Stormdry

£46.76

each (Inc. VAT)

View full details

Sika 4A Waterstop Leak Sealing Admixture 5L

808457

Sika 4a Waterstop is a rapid setting, ready to use waterproofing admixture which can be used to produce a paste for leak stopping against high water pressure infiltration when mixed with water and ordinary Portland cement.

Size

5 L

Colour

Brown

Type

Waterproofer

Manufacturer Model No

1070505

Brand Name

Sika