Drybase ECS Epoxy Floor Coatings for damp proofing floors and walls. Applied by brush or roller to provide protective coating that can easily be cleaned. Once painted on, Drybase ECS Epoxy Floor Coating provides resistance to oils and greases.
Size
5kg
Interior or Exterior Use
Interior
Coverage per Litre
Up to 30 - 35 m2 per 5 kg pack for one coat. Two coat application is standard.
Everything you need to effectively eliminate black mould, clean staining and sanitise treated areas for long-lasting protection. Designed for domestic use in high-humidity areas like bathrooms, kitchens and utility rooms, the kit includes three powerful products for a complete three-stage process. Dryzone Mould Eliminator delivers fast-acting mould removal with visible results in minutes. Dryzone Mould Remover Gel targets stubborn surface stains in hard-to-reach places like silicone, behind fittings and around seals with a thick formula that clings in place for deep action. Apply Dryzone 100 Mould Sanitiser to neutralise invisible spores and bacteria, helping prevent recurrence and leaving the surface hygienically clean. This easy-to-use kit is suitable for use on tiles, painted walls, sealants, uPVC and most non-porous building surfaces.
A high-performance cementitious waterproofing system designed for basements, cellars, and other below-ground structures that can withstand up to 5-bar water pressure. Supplied as a two-part kit with pre-measured cementitious powder and liquid polymer components, it produces a dense, durable slurry tested to withstand up to 5 bar hydrostatic water pressure (equivalent to 50 metres below ground). The polymer additive improves workability, bond strength and flexibility, making the kit suitable for internal tanking in both new-build and retrofit settings. Once mixed, it can be applied to damp masonry and concrete walls and floors using a trowel or brush in two coats. Ideal for areas prone to movement or salt efflorescence. Compliant with BS 8102:2022 as a Type A barrier system.
Size
12kg
Interior or Exterior Use
Interior
Coverage per Litre
Pressureless water: 3.5 – 4.5 kg/m², water under pressure: 3.5 – 5.5 kg/m²
Drybase Construction Joint Tape is a synthetic rubber strip, approximately 0.7 mm thick. It is covered on both sides with an alkaliresistant and flexible polyester fabric mat, which forms a web on the edges. The combined properties of the fabric mat and synthetic rubber ensure a strong bond with the concrete surface, maintaining excellent elasticity of the tape.
Drybase ECS Epoxy Floor Coatings for damp proofing floors and walls. Applied by brush or roller to provide protective coating that can easily be cleaned. Once painted on, Drybase ECS Epoxy Floor Coating provides resistance to oils and greases.
Everything you need to effectively eliminate black mould, clean staining and sanitise treated areas for long-lasting protection. Designed for domestic use in high-humidity areas like bathrooms, kitchens and utility rooms, the kit includes three powerful products for a complete three-stage process. Dryzone Mould Eliminator delivers fast-acting mould removal with visible results in minutes. Dryzone Mould Remover Gel targets stubborn surface stains in hard-to-reach places like silicone, behind fittings and around seals with a thick formula that clings in place for deep action. Apply Dryzone 100 Mould Sanitiser to neutralise invisible spores and bacteria, helping prevent recurrence and leaving the surface hygienically clean. This easy-to-use kit is suitable for use on tiles, painted walls, sealants, uPVC and most non-porous building surfaces.
A high-performance cementitious waterproofing system designed for basements, cellars, and other below-ground structures that can withstand up to 5-bar water pressure. Supplied as a two-part kit with pre-measured cementitious powder and liquid polymer components, it produces a dense, durable slurry tested to withstand up to 5 bar hydrostatic water pressure (equivalent to 50 metres below ground). The polymer additive improves workability, bond strength and flexibility, making the kit suitable for internal tanking in both new-build and retrofit settings. Once mixed, it can be applied to damp masonry and concrete walls and floors using a trowel or brush in two coats. Ideal for areas prone to movement or salt efflorescence. Compliant with BS 8102:2022 as a Type A barrier system.
Drybase Construction Joint Tape is a synthetic rubber strip, approximately 0.7 mm thick. It is covered on both sides with an alkaliresistant and flexible polyester fabric mat, which forms a web on the edges. The combined properties of the fabric mat and synthetic rubber ensure a strong bond with the concrete surface, maintaining excellent elasticity of the tape.