Free Click & Collect
Within One Hour
Delivery address
Collection branch
Ideas & Advice
VAT
EX
INC
Fillcrete Brickfill Expansion Joint Roll 10mm x 100mm x 10m
Hover Over to Zoom In
Frequently bought together
Overview
- Complies with all British Standards
- Ideal low resistance expansion joint filler
- Tear-off strip for easier application
- Very low water absorption
- Oil and ozone resistant
- Convenient to install
Technical specification
Length
10 m
Thickness
10 mm
Width
100 mm
Type
Expansion Joint Roll
Manufacturer Model No
10BFR100P
Brand Name
Brickfill
Reviews
Be the first to review this product.
H+H Celcon Hi-7 Aerated Concrete Block 7.3N 100mm
H+H's Celcon Blocks High Strength Grade (7.3N/mm2 identified with a black stripe on the block) is ideal where higher compressive strengths are required such as in the foundations and lower storeys of three storey buildings, piers under high vertical loads and in multi-storey buildings.
£5.62 each (Inc. VAT)
IKO Hyload Original Damp Proof Course 100mm x 20m
IKO Hyload Original Damp-proof Course system is a flexible polymeric sheet material, used within masonry walls to prevent passage of moisture from the ground and at all levels as cavity tray to prevent the downward movement of water.Trusted for over 40 years, Hyload Original is the UK’s leading High Performance DPC
£37.42 per roll (Inc. VAT)
Sovereign 30616230 CDM3 Lath Mesh Membrane Roll 1.5M x 10M
Sovereign CDM3 Lath/Mesh Membrane provides a robust drainage membrane suitable for use above and below ground on walls, floors and arched/vaulted ceilings, as part of the SovDrain waterproofing system. This membrane has a low stud profile (3mm), thus minimising wall and floor level changes.
£167.45 each (Inc. VAT)
Safeguard Drybase Plaster Membrane 1M X 10M
Drybase Plaster Mesh Membrane LP is produced using high-quality Polypropylene material and provides a barrier to moisture, salts and vapour. It is a slimline membrane with 2.5mm studs on the rear that enables the management of moisture without significantly reducing room space. A plastic mesh is welded to the front surface of the membrane, allowing it to accept plaster coats via standard trowel application or as a base for dot and dab plasterboard application.
£169.55 each (Inc. VAT)