nice bit of kit just a little on the heavy side but does a great gob
3 years ago
John B
0
0
5
Very impressed with...
Very impressed with this bit of kit to go with the Evo-System, Used it over the weekend along with the Evolution cross cut miter saw and stand to replace a carport roof.
Would definitely recommend.
6 years ago
John D
0
0
5
GEN2800
Very good output. Generator managed to cope with a commercial hammer drill, which has a high amperage demand for starting the drill from rest. Evo drive engine compensated with a short dip in revs.
This sediment filter sack is a filtration system, accepted by the Environment Agency, that controls flows and cleanses the water of silt and sediment and can detect the presence of hydrocarbons
FloodMate is an emergency pumping kit which has a powerful pump, two packs of Hydrosacks and discharge hoses for defending a property from low level flooding. Depending on which kit is selected, the pump is designed to pump water levels down to a level of between 3mm and 1mm. Hoses are light, easy to position and feature quick connections to enable fast deployment in an emergency. Supplied in a sturdy easy-carry case
The LSC1.4S or “puddle sucker� is able to pump water down to 1mm, which makes it suitable for pumping large or small areas of nuisance water found on flat surfaces. It incorporates a dual position outlet port, to enable the user to position the outlet hose horizontally or vertically and avoid it kinking
The BPS series, in thermoplastic, is designed for clean and slightly dirty water. The top discharge design makes them suitable for partial immersion applications and where space or access is restricted
This sediment filter sack is a filtration system, accepted by the Environment Agency, that controls flows and cleanses the water of silt and sediment and can detect the presence of hydrocarbons
FloodMate is an emergency pumping kit which has a powerful pump, two packs of Hydrosacks and discharge hoses for defending a property from low level flooding. Depending on which kit is selected, the pump is designed to pump water levels down to a level of between 3mm and 1mm. Hoses are light, easy to position and feature quick connections to enable fast deployment in an emergency. Supplied in a sturdy easy-carry case
The LSC1.4S or “puddle sucker� is able to pump water down to 1mm, which makes it suitable for pumping large or small areas of nuisance water found on flat surfaces. It incorporates a dual position outlet port, to enable the user to position the outlet hose horizontally or vertically and avoid it kinking
The BPS series, in thermoplastic, is designed for clean and slightly dirty water. The top discharge design makes them suitable for partial immersion applications and where space or access is restricted