Stormdry XR-Mortar is a semi-flexible polymer modified crack filling mortar for masonry. It can be used to seal cracks in bricks and masonry joints to prevent rain penetration or to repoint damaged areas of pointing in both internal and external environments. It is applied directly to the damaged area using a cartridge gun and nozzle to provide a waterproof barrier. It can also be used to plug damp proof course holes.
A radical chemical blend containing a sophisticated mixture of alkaline materials and wetting agents to attack varied types of blockages whether caused by hair, grease, fat, oils, etc.. Heavier than water the unique formula holds the active chemicals together, allowing them to sink to the source of the problem with minimum loss of activity.
SikaBond SBR+ is a one component, water based, general purpose, styrene butadiene rubber emulsion. When diluted with water it produces a gauging solution for improving adhesion, workability and waterproofing of mortars and cementitious mixes.
Drybase Construction Joint Tape is a synthetic rubber strip, approximately 0.7 mm thick. It is covered on both sides with an alkaliresistant and flexible polyester fabric mat, which forms a web on the edges. The combined properties of the fabric mat and synthetic rubber ensure a strong bond with the concrete surface, maintaining excellent elasticity of the tape.
Stormdry XR-Mortar is a semi-flexible polymer modified crack filling mortar for masonry. It can be used to seal cracks in bricks and masonry joints to prevent rain penetration or to repoint damaged areas of pointing in both internal and external environments. It is applied directly to the damaged area using a cartridge gun and nozzle to provide a waterproof barrier. It can also be used to plug damp proof course holes.
A radical chemical blend containing a sophisticated mixture of alkaline materials and wetting agents to attack varied types of blockages whether caused by hair, grease, fat, oils, etc.. Heavier than water the unique formula holds the active chemicals together, allowing them to sink to the source of the problem with minimum loss of activity.
SikaBond SBR+ is a one component, water based, general purpose, styrene butadiene rubber emulsion. When diluted with water it produces a gauging solution for improving adhesion, workability and waterproofing of mortars and cementitious mixes.
Drybase Construction Joint Tape is a synthetic rubber strip, approximately 0.7 mm thick. It is covered on both sides with an alkaliresistant and flexible polyester fabric mat, which forms a web on the edges. The combined properties of the fabric mat and synthetic rubber ensure a strong bond with the concrete surface, maintaining excellent elasticity of the tape.