H+H Celcon Standard Aerated Concrete Block Grey 3.6N 440mm x 100mm x 215mm
4.7
45 Reviews
Hover Over to Zoom In
Frequently bought together
Overview
- Internal and external leaf of cavity walls
- Solid walls
- Separating walls
- Partitions
- Multi-storey buildings
- Foundations
- Beam and Block floors
- Flanking walls
Technical specification
Height
215 mm
Length
440 mm
Width
100 mm
Weight
7 kg
Colour
Grey
Thermal Conductivity
0.15 W/mK
Compressive Strength
3.60 N per mm2
Fire Rating
Class A4
BBA Approved
Yes
Type
Lightweight Block
Brand Name
Celcon
Manufacturer Model No
SRC100100
Made To Order
N
Data sheets
Reviews
4.7
45 Reviews
Most liked positive review
Mark WALL-berg
I built a lovely wall with these. Trump would be pleased with the outcome!
Most liked negative review
Avoid if you're plastering over them
Nice light blocks, easy to cut and move around if you're a DIY'er. BUT. They are very porous though so they suck moisture out of your mortar as soon as you put it on - even if you've moistened them as I did. The biggest problem however is when they are plastered. They are difficult to seal prior to plastering and ...
View more
Sort reviews:
Sort reviews by:
Reviewed by 45 customers
5
Great product. Performed as expected
Great product. Performed as expected
4 months ago
David
Type of purchase: DIY
Yes, I would recommend to a friend
1
0
5
I would buy this again
Building a base
5 months ago
Christopher
Type of purchase: DIY
Yes, I would recommend to a friend
1
0
4
First Choice
Less damaged blocks per pallet than other brand.
1 year ago
customer
Type of purchase: DIY
Yes, I would recommend to a friend
1
0
3
Avoid if you're plastering over them
Nice light blocks, easy to cut and move around if you're a DIY'er. BUT. They are very porous though so they suck moisture out of your mortar as soon as you put it on - even if you've moistened them as I did. The biggest problem however is when they are plastered. They are difficult to seal prior to plastering and so they drag all the moisture out of the scratch coat and cause it to blow and crack the finishing coat. My plasterer said it's a well known problem and if he had known I was going to use them he'd have told me to get alternative ones (denser ones). He's just been back to scrape his first attempt off and put it on again. Fortunately it was just a doorway.
1 year ago
Richard from Bucks
Type of purchase: DIY
No, I would not recommend to a friend
0
6
5
i would buy again if needed
used these to form a shed base frame
1 year ago
customer
Type of purchase: DIY
Yes, I would recommend to a friend
2
0
4
Yes
Extension
2 years ago
customer
Type of purchase: Trade
1
0
5
Great product
Great service always on time!
2 years ago
customer
Type of purchase: DIY
Yes, I would recommend to a friend
1
0
5
Breezzeeee Blocks! 🤣
Branded from Travis Perkins, good price too
3 years ago
customer
Type of purchase: Trade
Yes, I would recommend to a friend
1
3
5
All good
All good
4 years ago
paul
Type of purchase: DIY
Yes, I would recommend to a friend
1
2
5
Ordered online no problems
Blocked up old door
4 years ago
steven
Type of purchase: DIY
Yes, I would recommend to a friend
2
0
H+H Celcon Hi-7 Aerated Concrete Block 7.3N 100mm
H+HÕs Celcon Blocks High Strength Grade (7.3N/mm2 Ð identified with a black stripe on the block) is ideal where higher compressive strengths are required such as in the foundations and lower storeys of three storey buildings, piers under high vertical loads and in multi-storey buildings.
£4.66 each (Inc. VAT)
H+H Celcon Solar Aerated Concrete Block 2.9N 100mm Pack of 120
This highly efficient block (thermal conductivity of just 0.11 W/mK) is sufficiently loadbearing for two storey buildings and can be used below DPC. Identified by the distinctive painted blue line, Celcon Solar Grade has a compressive strength of 2.9N/mm2 and is principally used where enhanced thermal performance is required.
£331.78 per pack (Inc. VAT)
Solid Dense 7.3N Concrete Block Grey 100mm
This solid, dense concrete block from Aggregate Industries is suitable for cavity or solid wall constructions, internal load bearing walls and beam and block flooring. Water resistant with sound insulation properties.
£2.35 each (Inc. VAT)
Solid Medium Density 3.6N Concrete Block 100mm
This lightweight aggregate block from Tarmac is suited to a number of load bearing applications and provide a high level of performance.
£3.52 each (Inc. VAT)