Free Click & Collect
Within One Hour
Delivery address
Collection branch
Ideas & Advice
VAT
EX
INC
Sika 1 Integral Liquid Waterproofer 5L
Hover Over to Zoom In
Frequently bought together
Overview
- Concentrate waterproofing admixture
- Blocks the pores and capillaries in the mortar
- Prevents the transmission of water
- Suitable for use in renders after DPC replacement
- Can be used in all Cement Floor Screeds and Wall renders
- Internal and external use
- Suitable for contact with drinking water
- Economic in use
- Chloride free
Technical specification
Size
5 L
Colour
Yellow
Type
Waterproofer
Manufacturer Model No
1070105
Brand Name
Sika
Reviews
Be the first to review this product.
NEW
Drybase Tanking Slurry is a cementitious, ready-mixed surface waterproofer. The waterproofing function is achieved by a unique composition of cement, graded quartz sand and selected additives. It can be used against active and passive water pressures. The initial and final bonding capability of Drybase Tanking Slurry is excellent, making it suitable to be applied to horizontal as well as vertical surfaces. It is durable, resistant to frost and heat after setting, but also permeable to vapour. Drybase Tanking Slurry is tested for use in contact with drinking water.
£51.84 each (Inc. VAT)
Ka Tanking Slurry Waterproofing Solution Grey 25kg
KA Tanking Slurry is the complete crystalline solution to waterproofing masonry and blockwork. Ideal for internal and external use as a waterproof render, it is suitable for use on walls prior to plastering and on floors prior to self-levelling. Designed to function against water penetration in various conditions, it can be used in foundation slabs, tunnels, irrigation channels, bathrooms, kitchens and so on.
£56.69 each (Inc. VAT)
NEW
Kit contains: x1 Dryrod 50 Box x1 Dryzone System Hole Clearing Tool - x1 Dryzone System Rod Cutting Tool- x1 Dryzone Drill Bit - 12mm x 300mm - x1 Stormdry Xr Mortar - No fuss, no mess, no stress. Dryrod is the next generation of rising damp treatment developed by Safeguard Europe Ltd. The patented, BBA approved 12mm diameter DIY damp proofing rods carry a powerful water repellent material, which cures to form a powerful barrier to rising damp. Once they are inserted, the rods will start to dry out the wall by slowly diffusing water repellent deep into the damp masonry, curing to form a powerful barrier to further rising damp. Installation: Simply insert the 9" rods into a series of 12mm holes drilled into the lowest available continuous mortar course of the wall. No specialist pumps or mastic guns required. A normal hammer drill will suffice. Once installed they diffuse the active ingredient deep into the wall before it cures to form a water-repellent chemical damp course. Advantages over other methods: The most effective rising damp treatment available - Proven to work even up to 95% saturation Quick & easy to install DIY rising damp treatment - Simply drill holes & insert the damp-proofing rods to form a new chemical damp course. No mess to clean up - The active ingredient is contained within the rods so there's no chance of messy spillages that occur with other solutions for damp proofing for walls.
£148.32 each (Inc. VAT)
Sika Grey Damp Proofing Slurry 25kg
Sika Damp-proofing Slurry is a ready to use (just add water), high quality, thin layer waterproof slurry coating, based on special cements and admixtures to provide a water and damp proof finish.
£54.17 each (Inc. VAT)